Sharp AL-1670 Misfeed Removal, Misfeed in the SPF, First confirm the misfeed location

Page 45

MISFEED REMOVAL

The copier will stop when a misfeed occurs. The misfeed ( ) indicator will blink and blinking red misfeed location indicators will indicate the approximate misfeed location.

If paper is accidentally torn during removal, be sure to remove all pieces. Be careful not to damage the photoconductive drum.

First confirm the misfeed location.

(P. 43)

(P. 44, 47)

(P. 47)

Misfeed in the SPF

A

C

Location A

Feeding roller cover

If an original misfeed occurs in the SPF, the copier will

Bstop and the red indicator which indicates an original misfeed will blink.

Open the feeding roller cover and pull the original gently

1to the left and out from the document feeder tray. Close the feeding roller cover.

STATUS INDICATORS

Location B

Right side cover

If the misfed original cannot be removed in step 1, open

2 the right side cover and remove the misfed original.

Close the right side cover.

Misfeed removal

43

Image 45

Contents AL-1670 For Your Protection Contents Safety Precautions Main Features Part Names and Functions Part Names and Functions AUTO/MANUAL/PHOTO / / key and indicators p Operation panel and keys for printer featuresOriginal Size Enter key and indicators p Paper Size indicators@1ORIGINAL Data indicator Key and indicators@2Light and dark keys and indicators @3AUTO Image key and indicator pDo not install your copier in areas that are Copier InstallationGetting Started Unpacking Checking Packed Components and AccessoriesInstall the TD cartridge SET-UPGently lift and pull out the paper tray until it stops SET-UP Turn the power switch on Load copy paperFront of the paper tray Store the pressure plate lock which has been removedPush the paper tray firmly back into the copier Loading Copy PaperLoading Copy Paper Press the Start key and then the Paper Size 11ENTER key Using the SPF Turn the power switch onNormal Copying Stream feeding mode Set the number of copies using the two copy quantity KeysNormal Copying Press the Start keyAdjust the copy density Using the original tableNormal Copying Automatic REDUCTION/ENLARGEMENT/ZOOMPress the Auto Image Key Enter the number of copies Press the Start keyManual REDUCTION/ENLARGEMENT/ZOOMUnfold the bypass tray Bypass Feed special paperBypass Feed special paper TWO-SIDED Copying Group mode Sort modeSORT/GROUP Offset stackCopying in the sort mode SORT/GROUPSet the originals face up in the document feeder tray When all Interrupt copies are finished, press Interrupting a Copy RUNPress the Interrupt key Automatic Exposure Adjustment To enter the toner save mode, press the light key Toner Save ModePress the copy ratio display Key XY ZoomSet the number of copies and press the Start key XY ZoomReverse Press the Dual page Copy key Dual page CopyRotation Copying 1 or 4 Press the 2 in 1 / 4 in 1 key to complete the selection Select the desired pattern number using copy quantity keysErase Press the Erase key to select the desired erase modeUse the Tray Select Key to select the paper trayMargin Shift Genuine Supplies TD Cartridge ReplacementTD Cartridge Replacement Drum Cartridge Replacement Drum Cartridge Replacement Misfeed in the SPF Misfeed RemovalFirst confirm the misfeed location Open the feeding roller cover and pull the original gentlyMisfeed in the bypass tray Misfeed RemovalMisfeed in the copier If the misfed original cannot be removed in steps 1Fusing unit is hot. Take care in removing paper Removing itPush gently the right side of the front cover to open Cover Misfeed in the transport area Misfeed in the lower paper tray Misfeed in the upper paper trayClose the side cover by pressing the handle on the cover Grasp the handle of the lower side cover and gently openClose the paper tray Close the lower side cover Remove the misfed paperUser Programs Setting the user programsList of user programs Press and hold the light key for more thanUser Programs Enter a program number using the left copy quantity KeyEntered value will be stored Power Save Modes Preheat modeAuto power shut-off mode Setting the power save modes Power Save ModesCopying from the preheat mode Copying from the auto power shut-off modeOriginal table and document feeder cover User MaintenanceBypass tray paper feed roller Transfer chargerUser Maintenance Charger cleaner out by holding the tabGently lift and pull out the upper paper tray and take Copier TROUBLE? Problem SolutionSelf-diagnostic function Copier TROUBLE?Example Types and sizes of copy paper SuppliesSupply part numbers Supply listGenuine supplies statement SuppliesProper storage Store the supplies in a location that isTurn the power switch off and disconnect the power Cord Moving InstructionsPush the paper tray back into the copier Copier SpecificationsSingle Pass Feeder SpecificationsIndex Index Material Safety Data Sheet Special Fire Fighting Procedure Ignition TemperatureFlash Point Method Used Flammable LimitsIngredients CAS No Proportion Other LimitsHealth Hazards None required under normal use Page Sharp Corporation