XY ZOOM
Use the PRESET RATIO selector ( 
, 
) keys and
5 zoom ( 
, 
) keys to change the copy ratio in the horizontal direction in a similar manner as for the vertical direction.
6
7
Press the copy ratio display ( 
) key.
●The selected ratio for the horizontal direction will be entered and the display will change to the copy quantity display.
●To verify the copy ratios, press and hold down the copy ratio display
( 
) key. The vertical and horizontal ratios will be alternately displayed.
Ensure that copy paper of the desired size is installed in the paper tray.
●If you have placed the original in the document feeder tray, copy paper of the appropriate paper size will be automatically selected depending on the original size and copy ratios. If you have placed the original on
the original table, use the ORIGINAL SIZE ENTER (
) key to select the original size. Copy paper will be automatically selected. If
desired, another paper tray can be selected by pressing the TRAY
SELECT ( 
) key.
SPECIAL FEATURES XY zoom
8 Set the number of copies and press the START ( 
) key.
●
●
To change the copy ratios again, press a PRESET
RATIO selector ( 
, 
) key or a zoom ( 
,
) key. Then, perform step 3 and the succeeding steps.
To cancel this function, press the 
) key again.
31