NORMAL COPYING
●For manual copy density adjustment, press the AUTO/MANUAL/
PHOTO ( 
/ 
/ 
) key to select MANUAL ( 
) and
adjust with the light ( 
) and dark ( 
) keys as desired.
●For photographs, select PHOTO ( 
) and then adjust with the light
( 
) and dark ( 
) keys as desired.
● There are 5 exposure steps indicated by 3 indicator lights. (The indicators light up one or two at a time.)
If exposure level 2 is selected, the two
Set the number of copies using the two copy quantity
6 ( 
, 
) keys.
● Press the right copy quantity key to set the units digit from 0 to 9. This key will not change the tens digit.
●Press the left copy quantity key to set the tens digit from 1 to 9.
● A single copy can be made with the initial setting, i.e., when “0” is displayed.
Tens digit | Units digit | ● | Press the CLEAR ( | ) key to clear an entry if a mistake is made. |
|
Press the START ( 
) key.
7 ● The number in the copy quantity display will decrease by 1 each time a copy is made.
●Press the CLEAR ( 
) key to stop copying in the middle of a run.
MAKING COPIES Normal copying
Stream feeding mode
If the stream feeding mode has been enabled using user program No. 4, the SPF indicator will continue to blink for approximately 5 seconds after feeding of all originals is completed. While this indicator is blinking, any new originals placed in the SPF will be fed and copied automatically. See page 49, USER PROGRAMS.
17