Sharp AL-1670 operation manual TD Cartridge Replacement

Page 42

TD CARTRIDGE REPLACEMENT

STATUS INDICATORS TD cartridge replacement

Remove the protective cover from the TD cartridge by

5 unlatching three cover hooks from the holes on the cartridge and then pulling the cover in the direction indicated by the arrow in the illustration.

Gently insert the TD cartridge along the guides until it

6 locks in place.

If dirt or dust is adhered to the TD cartridge, remove it before installing the cartridge.

Close the front cover by pushing both sides with your

7 hands and then close the side cover by pressing the

handle on the cover. The indicator will go out .

When closing the covers, be sure to close the front cover securely and then close the side cover. If the covers are closed in the wrong order, the covers may be damaged.

40

Image 42

Contents AL-1670 For Your Protection Contents Safety Precautions Main Features Part Names and Functions Part Names and Functions Original Size Enter key and indicators p Operation panel and keys for printer featuresAUTO/MANUAL/PHOTO / / key and indicators p Paper Size indicators@2Light and dark keys and indicators Key and indicators@1ORIGINAL Data indicator @3AUTO Image key and indicator pCopier Installation Do not install your copier in areas that areGetting Started Checking Packed Components and Accessories UnpackingInstall the TD cartridge SET-UPGently lift and pull out the paper tray until it stops Front of the paper tray Turn the power switch on Load copy paperSET-UP Store the pressure plate lock which has been removedLoading Copy Paper Push the paper tray firmly back into the copierLoading Copy Paper Press the Start key and then the Paper Size 11ENTER key Using the SPF Turn the power switch onNormal Copying Normal Copying Set the number of copies using the two copy quantity KeysStream feeding mode Press the Start keyUsing the original table Adjust the copy densityNormal Copying Press the Auto Image Key REDUCTION/ENLARGEMENT/ZOOMAutomatic Enter the number of copies Press the Start keyREDUCTION/ENLARGEMENT/ZOOM ManualBypass Feed special paper Unfold the bypass trayBypass Feed special paper TWO-SIDED Copying SORT/GROUP Sort modeGroup mode Offset stackCopying in the sort mode SORT/GROUPSet the originals face up in the document feeder tray When all Interrupt copies are finished, press Interrupting a Copy RUNPress the Interrupt key Automatic Exposure Adjustment Toner Save Mode To enter the toner save mode, press the light keyXY Zoom Press the copy ratio display KeyXY Zoom Set the number of copies and press the Start keyReverse Dual page Copy Press the Dual page Copy keyRotation Copying 1 or 4 Select the desired pattern number using copy quantity keys Press the 2 in 1 / 4 in 1 key to complete the selection Use the Tray Select Press the Erase key to select the desired erase mode Erase Key to select the paper trayMargin Shift TD Cartridge Replacement Genuine SuppliesTD Cartridge Replacement Drum Cartridge Replacement Drum Cartridge Replacement First confirm the misfeed location Misfeed RemovalMisfeed in the SPF Open the feeding roller cover and pull the original gentlyMisfeed in the copier Misfeed RemovalMisfeed in the bypass tray If the misfed original cannot be removed in steps 1Fusing unit is hot. Take care in removing paper Removing itPush gently the right side of the front cover to open Cover Misfeed in the transport area Close the side cover by pressing the handle on the cover Misfeed in the upper paper trayMisfeed in the lower paper tray Grasp the handle of the lower side cover and gently openRemove the misfed paper Close the paper tray Close the lower side coverList of user programs Setting the user programsUser Programs Press and hold the light key for more thanEnter a program number using the left copy quantity Key User ProgramsEntered value will be stored Power Save Modes Preheat modeAuto power shut-off mode Copying from the preheat mode Power Save ModesSetting the power save modes Copying from the auto power shut-off modeBypass tray paper feed roller User MaintenanceOriginal table and document feeder cover Transfer chargerUser Maintenance Charger cleaner out by holding the tabGently lift and pull out the upper paper tray and take Problem Solution Copier TROUBLE?Self-diagnostic function Copier TROUBLE?Example Supply part numbers SuppliesTypes and sizes of copy paper Supply listProper storage SuppliesGenuine supplies statement Store the supplies in a location that isTurn the power switch off and disconnect the power Cord Moving InstructionsPush the paper tray back into the copier Specifications CopierSpecifications Single Pass FeederIndex Index Material Safety Data Sheet Flash Point Method Used Ignition TemperatureSpecial Fire Fighting Procedure Flammable LimitsIngredients CAS No Proportion Other LimitsHealth Hazards None required under normal use Page Sharp Corporation