Sharp AL-1670 Supplies, Types and sizes of copy paper, Supply part numbers, Supply list

Page 60

SUPPLIES

Types and sizes of copy paper

 

Size

Weight

Capacity

Special paper

 

 

 

(21 lb. bond paper)

 

Paper tray

5-1/2" x 8-1/2"*

15 lbs. to 21 lbs.

250 sheets

 

 

to 11" x 17"

 

 

 

 

 

 

 

 

Bypass tray

Ordinary paper:

15 lbs. to 34 lbs.**

100 sheets

Transparency film,

 

5-1/2" x 8-1/2"

(Ordinary paper)

 

labels, envelopes***

 

to 11" x 17"

 

 

 

 

Envelopes:

 

 

 

 

Commercial 10

 

 

 

 

(4-1/8" x 9-1/2")

 

 

 

 

International DL

 

 

 

 

(110 x 220 mm)

 

 

 

 

International C5

 

 

 

 

(162 x 229 mm)

 

 

 

 

 

 

 

 

*5-1/2" x 8-1/2" copy paper can be used in the upper paper tray but cannot be used in the lower paper tray.

**For paper weighing from 28 to 34 lbs., 8-1/2" x 11" is the maximum size that can be fed through the bypass tray.

***Do not use envelopes that have metal clasps, plastic snappers, string closures, windows, linings, self-adhesive patches or synthetic materials. These will cause physical damage to the copier.

For best results, use only paper recommended by SHARP.

Special papers except envelopes must be fed one sheet at a time through the bypass tray. Up to 10 envelopes can be set at one time.

Supplies

Supply part numbers

When ordering supplies, please use the correct part numbers as listed below.

Be sure to use only genuine SHARP parts and supplies.

GENERAL INFORMATION

Supply list

Supply

Part number

Usable life

TD cartridge

AL-160TD

Approx. 18,000 or 15,000 sheets*

 

 

 

Drum cartridge

AL-160DR

Approx. 30,000 sheets

 

 

 

*18,000 sheets: Based on copying onto letter-type paper at 5% toned area. 15,000 sheets: Based on copying onto letter-type paper at 6% toned area.

( The life of the TD cartridge which has been included in the copier at the factory is approximately 5,000 sheets. (at 6% toned area))

58

Image 60
Contents AL-1670 For Your Protection Contents Safety Precautions Main Features Part Names and Functions Part Names and Functions Operation panel and keys for printer features AUTO/MANUAL/PHOTO / / key and indicators pOriginal Size Enter key and indicators p Paper Size indicatorsKey and indicators @1ORIGINAL Data indicator@2Light and dark keys and indicators @3AUTO Image key and indicator pCopier Installation Do not install your copier in areas that areGetting Started Checking Packed Components and Accessories UnpackingInstall the TD cartridge SET-UPGently lift and pull out the paper tray until it stops Turn the power switch on Load copy paper SET-UPFront of the paper tray Store the pressure plate lock which has been removedLoading Copy Paper Push the paper tray firmly back into the copierLoading Copy Paper Press the Start key and then the Paper Size 11ENTER key Using the SPF Turn the power switch onNormal Copying Set the number of copies using the two copy quantity Keys Stream feeding modeNormal Copying Press the Start keyUsing the original table Adjust the copy densityNormal Copying REDUCTION/ENLARGEMENT/ZOOM AutomaticPress the Auto Image Key Enter the number of copies Press the Start keyREDUCTION/ENLARGEMENT/ZOOM ManualBypass Feed special paper Unfold the bypass trayBypass Feed special paper TWO-SIDED Copying Sort mode Group modeSORT/GROUP Offset stackCopying in the sort mode SORT/GROUPSet the originals face up in the document feeder tray When all Interrupt copies are finished, press Interrupting a Copy RUNPress the Interrupt key Automatic Exposure Adjustment Toner Save Mode To enter the toner save mode, press the light keyXY Zoom Press the copy ratio display KeyXY Zoom Set the number of copies and press the Start keyReverse Dual page Copy Press the Dual page Copy keyRotation Copying 1 or 4 Select the desired pattern number using copy quantity keys Press the 2 in 1 / 4 in 1 key to complete the selectionPress the Erase key to select the desired erase mode EraseUse the Tray Select Key to select the paper trayMargin Shift TD Cartridge Replacement Genuine SuppliesTD Cartridge Replacement Drum Cartridge Replacement Drum Cartridge Replacement Misfeed Removal Misfeed in the SPFFirst confirm the misfeed location Open the feeding roller cover and pull the original gentlyMisfeed Removal Misfeed in the bypass trayMisfeed in the copier If the misfed original cannot be removed in steps 1Fusing unit is hot. Take care in removing paper Removing itPush gently the right side of the front cover to open Cover Misfeed in the transport area Misfeed in the upper paper tray Misfeed in the lower paper trayClose the side cover by pressing the handle on the cover Grasp the handle of the lower side cover and gently openRemove the misfed paper Close the paper tray Close the lower side coverSetting the user programs User ProgramsList of user programs Press and hold the light key for more thanEnter a program number using the left copy quantity Key User ProgramsEntered value will be stored Power Save Modes Preheat modeAuto power shut-off mode Power Save Modes Setting the power save modesCopying from the preheat mode Copying from the auto power shut-off modeUser Maintenance Original table and document feeder coverBypass tray paper feed roller Transfer chargerUser Maintenance Charger cleaner out by holding the tabGently lift and pull out the upper paper tray and take Problem Solution Copier TROUBLE?Self-diagnostic function Copier TROUBLE?Example Supplies Types and sizes of copy paperSupply part numbers Supply listSupplies Genuine supplies statementProper storage Store the supplies in a location that isTurn the power switch off and disconnect the power Cord Moving InstructionsPush the paper tray back into the copier Specifications CopierSpecifications Single Pass FeederIndex Index Material Safety Data Sheet Ignition Temperature Special Fire Fighting ProcedureFlash Point Method Used Flammable LimitsIngredients CAS No Proportion Other LimitsHealth Hazards None required under normal use Page Sharp Corporation