Sharp AL-1670 operation manual Erase, Use the Tray Select, Key to select the paper tray

Page 39

ERASE

Edge erase
A	A

Center erase

AB A B

Edge + Center erase

A B

A B

This copier has an edge erase mode and a center erase mode.

●Edge erase can be used to eliminate shadow lines around the edges of copies caused when thick paper or a book is used as an original.

●Center erase can be used to eliminate the shadow produced by the bindings of bound documents.

●Edge + center erase can be used to eliminate shadow lines around the edges of copies and to eliminate the shadow at the center of copies.

●The erase width can be set from 0" to 1" in five steps using user program No. 16. See page 49.

●This feature cannot be used with the 2 in 1 or 4 in 1 feature.

Place the original on the original table and close the

1 document feeder cover.

●The SPF can also be used for this feature.

	Use the TRAY SELECT (	) key to select the paper tray	SPECIAL
2 with the desired paper size.			FEATURES
	● The bypass tray and any tray with non-standard size paper cannot be		FEATURES

	used for this feature.

			Erase
3	Press the ERASE key to select the desired erase mode.
3	● To select the EDGE + CENTER ERASE mode, press the ERASE key

until both the EDGE and CENTER indicators light up.

4 Set the number of copies and press the START ( ) key.

37

Image 39

Contents AL-1670 For Your Protection Contents Safety Precautions Main Features Part Names and Functions Part Names and Functions Paper Size indicators Operation panel and keys for printer featuresAUTO/MANUAL/PHOTO / / key and indicators p Original Size Enter key and indicators p@3AUTO Image key and indicator p Key and indicators@1ORIGINAL Data indicator @2Light and dark keys and indicatorsDo not install your copier in areas that are Copier InstallationGetting Started Unpacking Checking Packed Components and AccessoriesInstall the TD cartridge SET-UPGently lift and pull out the paper tray until it stops Store the pressure plate lock which has been removed Turn the power switch on Load copy paperSET-UP Front of the paper trayPush the paper tray firmly back into the copier Loading Copy PaperLoading Copy Paper Press the Start key and then the Paper Size 11ENTER key Using the SPF Turn the power switch onNormal Copying Press the Start key Set the number of copies using the two copy quantity KeysStream feeding mode Normal CopyingAdjust the copy density Using the original tableNormal Copying Enter the number of copies Press the Start key REDUCTION/ENLARGEMENT/ZOOMAutomatic Press the Auto Image KeyManual REDUCTION/ENLARGEMENT/ZOOMUnfold the bypass tray Bypass Feed special paperBypass Feed special paper TWO-SIDED Copying Offset stack Sort modeGroup mode SORT/GROUPCopying in the sort mode SORT/GROUPSet the originals face up in the document feeder tray When all Interrupt copies are finished, press Interrupting a Copy RUNPress the Interrupt key Automatic Exposure Adjustment To enter the toner save mode, press the light key Toner Save ModePress the copy ratio display Key XY ZoomSet the number of copies and press the Start key XY ZoomReverse Press the Dual page Copy key Dual page CopyRotation Copying 1 or 4 Press the 2 in 1 / 4 in 1 key to complete the selection Select the desired pattern number using copy quantity keysKey to select the paper tray Press the Erase key to select the desired erase modeErase Use the Tray SelectMargin Shift Genuine Supplies TD Cartridge ReplacementTD Cartridge Replacement Drum Cartridge Replacement Drum Cartridge Replacement Open the feeding roller cover and pull the original gently Misfeed RemovalMisfeed in the SPF First confirm the misfeed locationIf the misfed original cannot be removed in steps 1 Misfeed RemovalMisfeed in the bypass tray Misfeed in the copierFusing unit is hot. Take care in removing paper Removing itPush gently the right side of the front cover to open Cover Misfeed in the transport area Grasp the handle of the lower side cover and gently open Misfeed in the upper paper trayMisfeed in the lower paper tray Close the side cover by pressing the handle on the coverClose the paper tray Close the lower side cover Remove the misfed paperPress and hold the light key for more than Setting the user programsUser Programs List of user programsUser Programs Enter a program number using the left copy quantity KeyEntered value will be stored Power Save Modes Preheat modeAuto power shut-off mode Copying from the auto power shut-off mode Power Save ModesSetting the power save modes Copying from the preheat modeTransfer charger User MaintenanceOriginal table and document feeder cover Bypass tray paper feed rollerUser Maintenance Charger cleaner out by holding the tabGently lift and pull out the upper paper tray and take Copier TROUBLE? Problem SolutionSelf-diagnostic function Copier TROUBLE?Example Supply list SuppliesTypes and sizes of copy paper Supply part numbersStore the supplies in a location that is SuppliesGenuine supplies statement Proper storageTurn the power switch off and disconnect the power Cord Moving InstructionsPush the paper tray back into the copier Copier SpecificationsSingle Pass Feeder SpecificationsIndex Index Material Safety Data Sheet Flammable Limits Ignition TemperatureSpecial Fire Fighting Procedure Flash Point Method UsedIngredients CAS No Proportion Other LimitsHealth Hazards None required under normal use Page Sharp Corporation