Sharp AL-1670 operation manual User Programs, List of user programs, Setting the user programs

Page 51

USER PROGRAMS

The user programs allow the parameters of certain functions to be set, changed, or canceled as desired.

List of user programs

This copier has the following user programs.

Program No.	Program name	Description

1	Auto clear time	Sets the auto clear time. The copier returns to the initial settings when
		the auto clear time elapses after the last copy is made.

2	Preheat mode	Sets the time that elapses before the copier enters the preheat mode after
		any operation is made. See page 52.

3	Auto power shut-off	Sets the time that elapses before the copier enters the auto power shut-off
	timer	mode after any operation is made. See page 52.

4	Stream feeding mode	Enables or disables the stream feeding mode. For description of the stream
		feeding mode, see page 17.

5	Auto power shut-off	Enables or disables the auto power shut-off mode. See page 52.
	setting

6	Border line for 2 in 1 or	Enables or disables the border line which is printed in 2 in 1 or 4 in 1
	4 in 1	copying. See page 35.

7	Rotation copy	Enables or disables rotation of original images. See page 34.

8	Auto paper select mode	Enables or disables the auto paper selection. See page 16.

9	Auto tray switching	Enables or disables the automatic tray switching which occurs when paper
		in a tray runs out. (This switching cannot switch to the bypass tray.)

16	Erase width adjustment	Sets the amount of the edge erase and center erase areas. See page 37.

17	Layout in 2 in 1 copy	Selects a pattern for 2 in 1 copying. See page 35.

18	Layout in 4 in 1 copy	Selects a pattern for 4 in 1 copying. See page 35.

19	Offset of paper output	Enables or disables the offset function of the paper output tray. See page 25.
	tray

User programs

Setting the user programs

Press and hold the light ( ) key for more than 5

1 seconds until all the alarm indicators ( , , , and ) blink and “– –” appears in the copy quantity display.

GENERAL INFORMATION

49

Image 51

Contents AL-1670 For Your Protection Contents Safety Precautions Main Features Part Names and Functions Part Names and Functions Paper Size indicators Operation panel and keys for printer featuresAUTO/MANUAL/PHOTO / / key and indicators p Original Size Enter key and indicators p@3AUTO Image key and indicator p Key and indicators@1ORIGINAL Data indicator @2Light and dark keys and indicatorsDo not install your copier in areas that are Copier InstallationGetting Started Unpacking Checking Packed Components and AccessoriesInstall the TD cartridge SET-UPGently lift and pull out the paper tray until it stops Store the pressure plate lock which has been removed Turn the power switch on Load copy paperSET-UP Front of the paper trayPush the paper tray firmly back into the copier Loading Copy PaperLoading Copy Paper Press the Start key and then the Paper Size 11ENTER key Using the SPF Turn the power switch onNormal Copying Press the Start key Set the number of copies using the two copy quantity KeysStream feeding mode Normal CopyingAdjust the copy density Using the original tableNormal Copying Enter the number of copies Press the Start key REDUCTION/ENLARGEMENT/ZOOMAutomatic Press the Auto Image KeyManual REDUCTION/ENLARGEMENT/ZOOMUnfold the bypass tray Bypass Feed special paperBypass Feed special paper TWO-SIDED Copying Offset stack Sort modeGroup mode SORT/GROUPCopying in the sort mode SORT/GROUPSet the originals face up in the document feeder tray When all Interrupt copies are finished, press Interrupting a Copy RUNPress the Interrupt key Automatic Exposure Adjustment To enter the toner save mode, press the light key Toner Save ModePress the copy ratio display Key XY ZoomSet the number of copies and press the Start key XY ZoomReverse Press the Dual page Copy key Dual page CopyRotation Copying 1 or 4 Press the 2 in 1 / 4 in 1 key to complete the selection Select the desired pattern number using copy quantity keysKey to select the paper tray Press the Erase key to select the desired erase modeErase Use the Tray SelectMargin Shift Genuine Supplies TD Cartridge ReplacementTD Cartridge Replacement Drum Cartridge Replacement Drum Cartridge Replacement Open the feeding roller cover and pull the original gently Misfeed RemovalMisfeed in the SPF First confirm the misfeed locationIf the misfed original cannot be removed in steps 1 Misfeed RemovalMisfeed in the bypass tray Misfeed in the copierFusing unit is hot. Take care in removing paper Removing itPush gently the right side of the front cover to open Cover Misfeed in the transport area Grasp the handle of the lower side cover and gently open Misfeed in the upper paper trayMisfeed in the lower paper tray Close the side cover by pressing the handle on the coverClose the paper tray Close the lower side cover Remove the misfed paperPress and hold the light key for more than Setting the user programsUser Programs List of user programsUser Programs Enter a program number using the left copy quantity KeyEntered value will be stored Power Save Modes Preheat modeAuto power shut-off mode Copying from the auto power shut-off mode Power Save ModesSetting the power save modes Copying from the preheat modeTransfer charger User MaintenanceOriginal table and document feeder cover Bypass tray paper feed rollerUser Maintenance Charger cleaner out by holding the tabGently lift and pull out the upper paper tray and take Copier TROUBLE? Problem SolutionSelf-diagnostic function Copier TROUBLE?Example Supply list SuppliesTypes and sizes of copy paper Supply part numbersStore the supplies in a location that is SuppliesGenuine supplies statement Proper storageTurn the power switch off and disconnect the power Cord Moving InstructionsPush the paper tray back into the copier Copier SpecificationsSingle Pass Feeder SpecificationsIndex Index Material Safety Data Sheet Flammable Limits Ignition TemperatureSpecial Fire Fighting Procedure Flash Point Method UsedIngredients CAS No Proportion Other LimitsHealth Hazards None required under normal use Page Sharp Corporation