Sharp TINSE1166MPZZ operation manual Safety Precautions, Especially for child safety

Page 6

SAFETY PRECAUTIONS (Continued)

14. Repair — If any of the following conditions occurs, unplug the power cord from the AC outlet, and request a qualified service person to perform repairs.

a.When the power cord or plug is damaged.

b.When a liquid was spilled on the product or when objects have fallen into the product.

c.When the product has been exposed to rain or water.

d.When the product does not operate properly as described in the operating instructions.

Do not touch the controls other than those described in the operating instructions. Improper adjustment of controls not described in the instructions can cause damage, which often requires extensive adjustment work by a qualified technician.

e.When the product has been dropped or damaged.

f.When the product displays an abnormal condition. Any noticeable abnormality in the product indicates that the product needs servicing.

15.Replacement parts — In case the product needs replacement parts, make sure that the service person uses replacement

parts specified by the manufacturer, or those with the same characteristics and performance as the original parts. Use of unauthorized parts can result in fire, electric shock and/or other danger.

16. Safety checks — Upon completion of service or repair work, request the service technician to perform safety checks to ensure that the product is in proper operating condition.

17. Wall mounting — When mounting the product on a wall, be sure to install the product according to the method recommended by the manufacturer.

18. Heat sources — Keep the product away from heat sources such as radiators, heaters, stoves and other heat-generating products (including amplifiers).

19. Batteries — Incorrect use of batteries may cause the batteries to burst or ignite. A leaky battery may corrode the equipment, dirty your hands or spoil your clothing. In order to avoid these problems, make sure to observe the precautions below:

Use the specified batteries only.

Install the batteries with due attention to the plus (+) and minus (-) sides of the batteries according to the instructions in the compartment.

Do not mix old and new batteries.

Do not mix batteries of different types. Voltage specifications of batteries of the same shape may vary.

Replace an exhausted battery with a new one promptly.

If you will not use the remote control for a long time, remove the batteries.

If leaked battery fluid gets on your skin or clothing, rinse immediately and thoroughly. If it gets into your eye, bathe your

eye well rather than rubbing and seek medical treatment immediately. Leaked battery fluid that gets into your eye or your clothing may cause a skin irritation or damage your eye.

20. Usage of the monitor must not be accompanied by fatal risks or dangers that, could lead directly to death, personal injury, severe physical damage or other loss, including nuclear reaction control in nuclear facility, medical life support system, and missile launch control in a weapon system.

21. Do not stay in contact with the parts of the product that become hot for long periods of time. Doing so may result in low-temperature burns.

WARNING:

This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate counter measures.

To maintain compliance with EMC regulations, use shielded cables to connect to the following terminals: PC/AV DVI-D output terminal, PC/AV DVI-D input terminal, PC/AV HDMI input terminal, PC D-SUB input terminal, PC RGB input terminals, and RS-232C input/output terminals.

If a monitor is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

Using fixing devices like wall mount brackets recommended by the manufacturer.

Only using furniture that can safely support the monitor.

Ensuring the monitor is not overhanging the edge of the supporting furniture.

Not placing the monitor on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the monitor to a suitable support.

Not standing the monitors on cloth or other materials placed between the monitor and supporting furniture.

Educating children about the dangers of climbing on furniture to reach the monitor or its controls.

Especially for child safety

-Don’t allow children to climb on or play with the monitor.

-Don’t place the monitor on furniture that can easily be used as steps, such as a chest of drawers.

-Remember that children can become excited while watching a program, especially on a “larger than life” monitor. Care should be taken to place or install the monitor where it cannot be pushed, pulled over, or knocked down.

-Care should be taken to route all cords and cables connected to the monitor so that they cannot be pulled or grabbed by curious children.

E4

Image 6
Contents PN-V601 Neutral Model No Serial NoEarth LiveLCD Monitor Important InformationInformation on Disposal for Business Users Important InformationInformation on Disposal for Users private households European UnionSafety Precautions Dear Sharp CustomerSafety Precautions Especially for child safetyManual Scope Tips and Safety InstructionsPower Cord LED BacklightContents Connecting Peripheral Equipment Supplied ComponentsMultiple screen connection Connection with video cableConnection with the control kit optional Connecting Peripheral EquipmentConnection with RS-232 cable Connect the monitors in orderInstalling the batteries Preparing the Remote Control UnitConnecting the Power Cord Remote control operation rangeAffixing the Protection Covers Binding CablesRemoving the Handles Pieces as necessaryTurning power on/off Turning Power On/OffTurning on the main power Disabling power on/off operationsMoniteur LCD Information ImportanteInformation Importante Suite Au sein de l’Union européennePays hors de l’Union européenne Cher Client Précautions DE SécuritéPrécautions DE Sécurité Suite En particulier pour la sécurité des enfantsÉtendue du manuel Conseils ET Mesures DE SécuritéLe cordon d’alimentation LED de rétroéclairageTable des matières Précautions Pour LE MontageComposants fournis Connexion de périphériquesConnexion de plusieurs écrans Connexion avec le câble vidéoConnexion au récepteur de télécommande Optionnel Connexion avec le câble RS-232Connexion de périphériques Raccordement du cordon d’alimentation Mise en service de la télécommandePortée de la télécommande Mise en place des pilesAjout des protections de trou Fixation des câblesSuppression des poignées Assurez-vous que les poignées sont bien fixéesNeutralisation des fonctions de mise sous/hors tension Mise sous tension et hors tensionMise sous/hors tension NMode de fonctionnementMonitor LCD Información ImportanteInformación sobre eliminación para empresas usuarias Información Importante ContinuaciónInformación sobre eliminación para usuarios particulares En la Unión EuropeaEstimado Cliente DE Sharp Precauciones DE SeguridadPrecauciones DE Seguridad Continuación Especialmente para la seguridad de los niñosÁmbito del manual Consejos E Instrucciones DE SeguridadCable de alimentación Retroiluminación de LEDsÍndice Precauciones DE MontajeComponentes suministrados Conexión de equipos periféricos Componentes suministrados Conexión de equipos periféricosConexión de múltiples pantallas Conexión con cable de vídeoConexión de equipos periféricos Conexión con cable RS-232Conexión con el kit de control opcional Conecte los monitores por ordenInstalación de las pilas Preparación del control remotoConexión del cable de alimentación Distancia operativa del control remotoFijación de las tapas de protección Fijación de los cablesRetirada de las asas Apriete los cablesNModo operativo Encendido/apagadoEncendido/apagado NAjuste de fecha y horaPage 10GKS1 TINSE1166MPZZ1