Bar Code Message Formatting Selections (Group C )
Scanned bar code data can be formatted with the addition of preambles, postambles, and terminator characters. The settings below will augment bar code data scanned by the Omni. A
{Preamble}{Code ID}{Data}{Terminator}{Postamble}
1.Enter BAR CODE MESSAGE FORMATTING SETUP MODE by typing /E/D/FC.
2.Press <ENTER>. The reader should beep twice.
3.Type the
4.Press <ENTER>. The reader should beep twice.
5.Type the
6.Press <ENTER>. The reader should beep twice.
7.Save the change and exit the Bar Code Setup Mode by typing CZ.
8.Press <ENTER>. The reader should beep four times.
Note: To review the group’s current setting(s), type CY<ENTER> while in the setup mode. To reset the current setting(s) to its group default, type CX<ENTER> while in
Bar Code Setup Mode.
Bar Code Terminator Character
Enter and Line Feed, Enter, Line Feed, or None: For some applications, it may be convenient to end a string of bar code scan data with a terminator character. For example, with keyboard entry, it is common to have the opera- tor signify the end of the data input with the “Enter” keystroke. The termina- tor character serves this function.
SELECTION CODE: C1 |
|
|
RETURN and Line Feed | A |
|
RETURN | B |
|
Line Feed | C |
|
None | D | |
EXAMPLE:
To set the bar code terminator character to Line Feed, enter: /E/D/FC<ENTER>C1<ENTER>C<ENTER>CZ<ENTER>
10