Omnitron Systems Technology RS-232 user manual Read Two-Digit Addendum, Read Five-Digit Addendum

Read Two-Digit Addendum

If enabled, the reader will decode the two-digit secondary symbol when it is scanned with the primary symbol, and add the data to the end of the transmis- sion. If not, any two-digit secondary symbol will be ignored.

SELECTION CODE: G1
Read Two-Digit Addendum	K
Do Not Read Two-Digit Addendum	L

Read Five-Digit Addendum

This option operates in the same manner as the Read Two Digit Addendum option except it enables the reading of a five digit secondary symbol.

SELECTION CODE: G1

Read Five-Digit Addendum	M
Do Not Read Five-Digit Addendum	N

Addendum Required

If a two or five-digit addendum is enabled, then enabling this option will require an addendum be present before a good read is registered. If not, then symbols with and without the addendum will be accepted.

SELECTION CODE: G1

Addendum Required

Addendum Not Required

O

P

Add Separator Space

This option is used with the Two and Five-Digit Addendum options. If en- abled, an ASCII space character is inserted between the data decoded from the primary UPC symbol and the addendum symbol.

SELECTION CODE: G1

Add Space Separator

Not Add Space Separator

Q

R

Convert UPC-A to EAN-13

SELECTION CODE: G1

Do Not Convert to EAN-13	S
Convert to EAN-13	T

24