Omnitron Systems Technology RS-232 user manual Msi

EXAMPLE:

To review the reader’s current settings for the Code 39 bar code, first find the settings for Code 39 listed in the Industrial Bar Codes setup group. (The single alpha character group name is F.) Then in Notepad type: /E/D/FF<ENTER>FY<ENTER>

A sample response is shown below.

Remember to end the review by typing: FZ<ENTER> This will take the reader out of the setup mode and bring it back into its normal reading mode.

=======================================================

Industrial Bar Code Setting

Code 39	Enabled; Full ASCII Off
Min Length = 01; Max Length = 60; No Check Digit; Stop-Start Send
I 2 0f 5	Enabled; Fixed Length Off
Min Length = 01; Max Length = 60; No Check Digit
FEBRABAN	Enabled
S 2 of 5	Enabled; Fixed Length Off
Min Length = 01; Max Length = 60; No Check Digit
Code 128	Enabled
Min Length = 01; Max Length = 60
Codabar	Enabled; StopStart Not Send
Min Length = 01; Max Length = 60; No Check Digit
MSI	Enabled; Check Digit Not Send
Min Length = 01; Max Length = 60; Check Digit Double Modulo 10
Telepen	Enabled, ASCII Mode

Min Length = 01; Max Length = 60

=======================================================

29