MRV Communications TS700/G, TS700/155, TS700/100 user manual TS800/155 Standard Model

M R V C o m m u n i c a t i o n s , I n c . – I n s t a l l a t i o n M a n u a l

B. TS800/155 Standard Model

The TS800/155 supports most of the prevalent protocols in the 34-155 Mbps range. Support for a special protocol, which is not on the list, can be ordered after coordination with the factory. This model can be used for Open Protocol applications which ensures complete transparency (including all data in the range of 1-155 Mbps.) In this case, a maximum 2 dB of the power budget is lost.

Figure 1.3: TS800/155 Standard Model Panel Schematic

Back Panel Description

Table 3: TS800/155 Standard Model Back Panel Controls, Interfaces, and Indicators

Connectors

Power	Power source Terminal Block (Main or UPS).
	AC power supply (100 to 240 Vac) or DC power
	supply (24 to 60 Vdc)
Fiber optic	Fiber Optic interface for connection to the
	peripheral equipment. The standard interface is MM
	1310nm SC connector; other interfaces are available
	upon request.
	In model TS800/155-F with the fusion option, there
	are two fiberoptic interface ports for connection to
	the Fusion system; one primary and the other
	redundant.
Remote monitor	Connection to the RSM. (The RSM has to be
	ordered separately)
Management	Connection to 10Base-T SNMP management
	interface. Pins 1,2: TX and 3,6 RX.
	Pins (4,5) and (7,8) of this connector can be used
	for dry contact purposes, for Airlink flag and F/O
	flag alarms respectively

5