MRV Communications TS800/155, TS700/155, TS700/100, TS700/G user manual Data Rate DIP switch

Page 17

M R V C o m m u n i c a t i o n s , I n c . – I n s t a l l a t i o n M a n u a l

Indicators

Air RX Flag LED

Green LED indicates data received by the Airlink

(7-segment

 

receiver. Turns ON at the threshold level.

display and

 

 

LEDs)

Air RX Sync LED

Yellow LED. Turns ON if the rate of the received

 

 

Data matches the Data Rate set on the Data Rate

 

 

DIP switch.

 

 

 

 

F/O Main, RX Flag

Upper green LED indicates Data received by the

 

LED

Fiber Optic receiver. Turns ON at the threshold

 

 

level.

 

 

 

 

F/O Main, RX Sync

Lower green LED. Turns ON if the rate of the

 

LED

received Data matches the Data Rate set on the

 

 

Data Rate DIP switch.

 

 

 

 

F/O Redundant, RX

Upper green LED indicates Data received by the

 

Flag LED

Fiber Optic receiver. Turns ON at the threshold

 

(Optional)

level.

 

 

 

 

F/O Redundant, RX

Lower green LED. Turns ON if the Fusion is

 

Sync LED

active and there is synchronisation with the

 

(Optional)

received Data.

 

 

 

 

Optical Power 7-

Digital readout indicates the Optical Power level

 

segment display

received by the Airlink receiver.

 

 

 

 

Alignment LED

Yellow LED. Turns ON if the Alignment

 

 

Operating Mode is selected.

 

 

 

 

Loopback LED

Yellow LED. Turns ON in LOOPBACK mode.

 

 

Flashing in Remote Loop mode.

 

 

 

 

Fusion LED

Yellow LED. Turns ON if the Fusion mode is

 

 

enabled.

 

 

Flashing when the Fusion (radio back-up system) is

 

 

active.

 

 

 

 

SW Mode LED

Red LED. Turns ON if the SW Mode

 

 

(SOFTWARE) Operating Mode is selected.

 

 

 

 

Laser Status

Shining Red LED: Turns ON when the Laser is

 

 

ON and turns OFF when the laser is powered off

 

 

by pushing the DS toggle #4 ON.

 

 

 

 

Management TX

Flashing when the RSM-SNMP is connected and

 

 

the TereScope is transmitting management Data.

 

 

(There is no Link indication)

 

 

 

 

Management RX

Flashing when the RSM-SNMP is connected and

 

 

the TereScope is receiving management Data.

 

 

(There is no Link indication)

 

 

 

Alignment

Telescope

For fine alignment.

7

Image 17
Contents UserManual UserManual TableofContents P E N D I Standards Compliance StandardsFCC Notice CE MarkOther Standards MRV  Laser Safety CertificationDisclaimer TrademarksAboutthisUserManual Before Installing SafetyRequirementsServicing Introduction Carefully Read the Entire Manual Before InstallingModels Part Number Description Using the Part Number for OrderingTheProduct Front MRV Back Panel Description TS800/155 Standard Model DS1 Toggles Data Rate DIP switch TS800/155-F Standard Model including Fusion option RF Transceiver Fusion Operation Mode5b TS & Fusion FusionTS700/100 Fast-Ethernet System OFF Auto-negotiation, on Forced MRV Display LEDs,Dry Dry contact Only TS800 Monitoring and Management optionsManagement Copper Connection Typical ConnectionFiber Connection Line of Sight SiteSurveyOrientation Location & RangeConsult Factory in Case of Doubt Optimal Mounting Unacceptable Mounting Mounting Environment & StabilityPage Transmitting through a Window Wall Mounting using JMP and JMB12 shows the arrangement for transmitting through a window Infrastructure PowerData/Signal Cabling Handle the Fibers Very Carefully BenchTest SetupCompatibility Test equipmentTS700/100Fastethernet IR link Bench testDisplay and Results IndicatorsExpected Results Received powerDescription InstallationAccessories TereScope Parts External view Part DescriptionAiming Head Adjustment and Locks Detachment of the TS from the JMP-L Installer Tool Kit JITK-LMounting Standard position a Mounting the accessoriesMounting on the floor Special MountingJMP-L Mounting on a fragile/crumbly wall17 Alignment kit mountedon JMP-L Back view Attachment of the Transceiver TereScope HeadPowering on the TereScope AimingProcedureTransceiver Alignment ProcedureGeneral Tools and EquipmentFine Alignment 13 Position after the horizontal aiming 15a and 6.15b Alignment screws Link Operating Test InstallationCompletionBefore Closing the Rear Door Visual Inspection17 Mounted TereScope Left View Periodic Visits MaintenanceAccuracy should be examined and restored if necessary Appendix a TS700/100 Fast-Ethernet Light TS800/155 high speed Light TS700/G Giga-Light Appendixb Packing box contains AppendixcAppendixd List of the Tools Supplied by MRV Communications Where to usePoints to Remember IntroductionInterference Figure E.3 Active Transmitters Shown Darkened Page Appendixf Effect of Wind on Terescopes FSO Chaining AppendixGIndirect Chaining Use the indoor switch in building C for the chainingFSO products & Chaining Product series No of chained links Appendixh Site survey Installation System failure Appendixi