Lucent Technologies 518-456-10 manual Automatic VMS Cover #310, Line Coverage Extension #208

Line Coverage Extension (#208)

To assign line coverage for the extension numbers specified in the VMS-Mail column on Form A, Page 1, Line Coverage:

1.Press #208.

2.At the Line: prompt, enter the first line for which an extension is specified in the VMS-Mail column of Form A, Page 1, Line Coverage.

3.At the Data: prompt, enter the number of the extension specified in the VMS-Mail column.

4.To program another line, press nor puntil the appropriate line number displays.

5.Repeat Steps 3 and 4 for each VMS-Mail line for which an extension num- ber is written on Form A.

6.Continue with the next section, “Automatic VMS Cover.”

Automatic VMS Cover (#310)

Check Form B2 to see if Automatic VMS Cover is assigned to any extensions. If it is, follow the procedure below. If not, skip to “VMS Cover Rings.”

To change the Automatic VMS Cover setting for an extension to Assigned as indicated on Form B2:

1.Press #310.

2.Enter the number of the first extension to which Automatic VMS Cover is to be assigned.

3.Press Duntil the display reads 1 Assigned.

4.To program another extension, press nor puntil the extension number shows on the display.

5.Repeat Steps 3 and 4 for each extension to which Automatic VMS Cover is to be assigned.

6.Continue with “VMS Cover Rings” below.

32