Password Recovery | Datacom Systems VS-1200 specs

VS-1200 Data Acccess Switch

4.1.2Password Recovery

Password Recovery is provided for cases where a user has forgotten the Superuser and/or Administrator login password. Password recovery is accomplished by connecting to the unit serially using a HyperTerminal like program and rebooting the unit. As the power-up sequence is occurring, depress <Control> <C>. Upon receipt of this command, a text recovery key will be generated and displayed prior to the prompt. This key is used to reset the passwords. An example recovery key prompt is: 617A6185774$

You must call Datacom Service Center with this recovery key in order to obtain the required response to reset passwords. Given a valid reset response, the factory default passwords will be saved in Non-Volatile memory. If an invalid response is given, a new recovery key will be calculated and displayed at the prompt, as described above, after first clearing the screen.

4.1.3Basic Commands (Read Only Access)

The following section shows the long form of the basic command set with the shortcut input for the command noted in parenthesis. All commands, either the exact long form or the shortcut form, are entered after the prompt (default >) at the cursor. No auto-fill mode is available. After the topic heading, a brief overview of the command display function is given followed by an example (Example: >) command input.

4.1.3.1HELP (HE) or (?)

When this command is entered, a list of commands, their shortcut inputs, and their descriptions will display. For the use and application of each command, refer to the individual command description within this section. The HELP command displays the available commands as shown:

Example: > ?
Available commands:
HELP	HE / ?	Show Help
EXIT	EX	Exit Shell
SHOW	SH	Show All Current Configurable Values
SHOW PRODUCT	SH PR	Show Product Name and Serial Number
SHOW TIME	SH TI	Show System Date and Time
SHOW MANAGEMENT	SH MA	Show Management Configuration
SHOW PORT CONFIG	SH PO CO	Show Port Configuration
SHOW PORT ROUTING	SH PO RO	Display Routing Summary
SHOW GROUPS	SH GR	Show Group Configuration
SU	SU	Enter Superuser Mode
SU SET PASSWORD	SU SE PA	Set Superuser Password
SHOW USERS	SH US	Display Users
SET IP	SE IP	Set IP
SET SUBNET	SE SU	Set Subnet Mask
SET GATEWAY	SE GA	Set Default Gateway
SET PROMPT	SE PR	Set Command Prompt (max 32 bytes)
SET DATE	SE DA	Set System Date
SET TIME	SE TI	Set System Time
SET PORT NAME	SE PO NA	Set Port Name (max 32 bytes)
SET PORT SPEED	SE PO SP	Set Port Speed