Datacom Systems VS-1200 manual ADD User AD US

Page 25

Initial Configuration

25

4.1.4.11 SET PORT VTAG (SE PO VT)

This command is used to change the capability of a port to either pass VLAN Tags or strip them from a frame and recalculate the CRC of the frame as shown:

SE PO VT (Comma separated list of port numbers, port names, or group names) ON/OFF

Example: # SE PO VT 1,4,6,7 ON

#

4.1.4.12 SET PORT GROUP (SE PO GR)

This command is used to create a port list under a common name for ease of use. When displayed, the common name is all caps, regardless of case entry. As part of this command, there is a command separator (CONTAINS) or, if the OFF parameter (delete the group) is used, the CONTAINS is not used. A maximum of 10 groups is allowed.

Groups, as designated by the administrator (Superuser,) belong to the same logical group. Specifically, groups can be configured as if they were a single logical port, enabling a high degree of control during both the initial setup and all subsequent moves or changes as shown:

SET PORT GROUP (SE PO GR) group name [OFF] or [CONTAINS] port list

Example: # SE PO GR DatacomPorts CONTAINS 4,5,6

#SE PO GR DatacomPorts OFF

4.1.4.13ADD USER (AD US)

This command is used to add users to the configurable product as shown:

ADD USER (AD US)

Example: # AD US

Enter New Username: newuser

Confirm Password: ****

User newuser has been saved

#

4.1.4.14 EDIT USER (ED US)

This command edits Usernames/Passwords as shown:

EDIT USER (ED US) user name

Example: # ED US newuser

Enter New Username: edituser

Enter Password: ****

Confirm Password: ****

User edituser has been saved

#

© 2009 Datacom Systems Inc

Image 25

Contents USERguide Page Product Description Datacom Systems Inc VS-1200 Data Acccess SwitchTable of Contents Customer Service Hardware InstallationVS-1200 Series Functional Drawing Application Copyright License Agreement Trademark Attribution Terms of UseProprietary Notice Certifications and MarksSafety Notices and Warnings VS-1200 Series Summary OverviewWhat Shipped? VS-1200 Series Features and BenefitsVS-1200 Series Model Specific Specifications VS-1200 Series Common SpecificationsPower Consumption 12W BTU/h Operating Range Relative Humidity 5 to 90% non-condensingPage VS-1200 Series Front Panels HardwareVS-1210BT/SFP Front Panel Description PowerAny-to-Any Ports Management Port Rear Panel DescriptionInput Power Power Switch SFP seriesSerial DB9 Rear Label BT seriesCommand Line Interface CLI Initial ConfigurationBasic Functionality Basic Commands Read Only Access Password RecoverySET Port Monitor SE PO MO TAP Show Groups SH GR Group NameShow Port Routing SH PO RO SU SET Password SU SE PA Superuser Commands Configuration AccessShow Users SH US SET Date Mmddyy # SET IP Subnet Gateway# SE PO MO 3 OFF SET Time HhmmssADD User AD US Delete User Username Serial Port Configuration DB9HyperTerminal TCP/IP Winsock Management Port Configuration RJ45Port Number IP Address Configuration with HyperTerminal IP Address ConfigurationTelnet Accessories Communications HyperTerminal VS-1200 Data Acccess Switch Initial Configuration IP Address Configuration with Telnet Network Connections Accessories Command Prompt Initial Configuration Exercise CLI Setting Ports Initial Configuration # SET Port Monitor 2 from 8,9 # SET Port Monitor 1 from 7,9# SET Port Monitor 6 from 3,4 # SET Port Monitor 5 from# SET Port Monitor 7 from # SET Port Monitor 8 fromSmall Form-Factor Plug Module Safety GuidelinesIntallation Prerequisites Removing the SFP Module Installing the SFP ModulePage Power Hardware InstallationAny-to-Any Connection Management Connection VS-1210BT-BT/SFP VS-1200 Series Functional DrawingVS-1204BT VS-1204SFP Application Gathering the Data HyperTerminal configuration exampleVS-1200 Data Acccess Switch # SET Port Monitor 6 from # SET Port Monitor 4 from# SET Port Monitor 9 from VS-1200 Data Acccess Switch Application # SET Port Monitor 6 from 1,3 # SET Port Monitor 5 from 1,3# SET Port Monitor 7 from 2,4 # SET Port Monitor 8 from 2,4Internet Warranty Customer ServiceLimits of Liability Datacom Systems Inc