Datacom Systems VS-1200 manual IP Address Configuration, Telnet

Page 28

28

VS-1200 Data Acccess Switch

4.3.2TELNET

Most network equipment and operating systems with a TCP/IP stack also support some kind of TELNET service server for remote configuration. Security-related shortcomings have limited TELNET (TErminaL NETwork) usage, although TELNET is still widely used when diagnosing problems, manually "talking" to other services without specialized client software, and administration of network elements such as integration and maintenance of core network elements.

IMPORTANT: For hostname, if initial IP Address HAS NOT BEEN configured, use 192.168.1.1

(default) or if initial IP Address HAS BEEN configured, use the Local Area Network address setting input during initial IP Address configuration.

TELNET using MANAGEMENT RJ45 - software configuration of the hardware

At the Windows command prompt enter:

telnet

At the Microsoft Telnet> prompt enter:

o nnn.nnn.nnn.nnn (open hostname) [i.e., o 192.168.1.1 or Local Area Network])

After reviewing the Command Line Interface (CLI) 17 section and Exercise - CLI setting Ports 36 section, detailed IP Address configuration can be found in the IP Address Configuration 28 section.

4.4IP Address Configuration

All VS-1200 series are shipped with a factory default configuration as follows:

IP Address:192.168.1.1; Subnet Mask: 255.255.255.0; Default Gateway: 0.0.0.0

IMPORTANT: If you expect to remotely connect to the VS-1200 series, you must change the IP Address, Subnet Mask and Default Gateway to match your Local Area Network as described in either the 'IP Address Configuration with HyperTerminal 28 ' section or 'IP Address Configuration with TELNET 32 ' section.

Note: If your VS-1200 already has the IP Address, Subnet Mask and Default Gateway set for your network, you may proceed to the 'Small Form-Factor Plug Module 40 ' section.

4.4.1IP Address Configuration with HyperTerminal

The IP address of the configurable series can be configured via a serial connection with either Microsoft's HyperTerminal application (available on most Windows PCs) or an open source free software terminal emulator for MS-Windows.

Step 1. Plug the VS-1200 into an external power source using a supplied switching AC adapter and AC line cord. Note, POWER 1 or 2 LED is illuminated green indicating power is available from the connected DC power socket. The other POWER LED is not illuminated, indicating a lack of power to the unconnected DC power socket.

© 2009 Datacom Systems Inc

Page 27 Page 29
Image 28
Page 27 Page 29
Contents USERguide Page Product Description VS-1200 Data Acccess Switch Datacom Systems IncTable of Contents Customer Service Hardware InstallationVS-1200 Series Functional Drawing Application Terms of Use Copyright License Agreement Trademark AttributionProprietary Notice Certifications and MarksSafety Notices and Warnings Overview VS-1200 Series SummaryVS-1200 Series Features and Benefits What Shipped?VS-1200 Series Common Specifications VS-1200 Series Model Specific SpecificationsPower Consumption 12W BTU/h Operating Range Relative Humidity 5 to 90% non-condensingPage VS-1200 Series Front Panels HardwareVS-1210BT/SFP Front Panel Description PowerAny-to-Any Ports Rear Panel Description Management PortPower Switch SFP series Input PowerSerial DB9 Rear Label BT seriesCommand Line Interface CLI Initial ConfigurationBasic Functionality Password Recovery Basic Commands Read Only AccessSET Port Monitor SE PO MO Show Groups SH GR Group Name TAPShow Port Routing SH PO RO SU SET Password SU SE PA Superuser Commands Configuration AccessShow Users SH US # SET IP Subnet Gateway SET Date MmddyySET Time Hhmmss # SE PO MO 3 OFFADD User AD US Delete User Username Serial Port Configuration DB9HyperTerminal TCP/IP Winsock Management Port Configuration RJ45Port Number IP Address Configuration with HyperTerminal IP Address ConfigurationTelnet Accessories Communications HyperTerminal VS-1200 Data Acccess Switch Initial Configuration IP Address Configuration with Telnet Network Connections Accessories Command Prompt Initial Configuration Exercise CLI Setting Ports Initial Configuration # SET Port Monitor 1 from 7,9 # SET Port Monitor 2 from 8,9# SET Port Monitor 5 from # SET Port Monitor 6 from 3,4# SET Port Monitor 7 from # SET Port Monitor 8 fromSmall Form-Factor Plug Module Safety GuidelinesIntallation Prerequisites Installing the SFP Module Removing the SFP ModulePage Power Hardware InstallationAny-to-Any Connection Management Connection VS-1200 Series Functional Drawing VS-1210BT-BT/SFPVS-1204BT VS-1204SFP Gathering the Data HyperTerminal configuration example ApplicationVS-1200 Data Acccess Switch # SET Port Monitor 6 from # SET Port Monitor 4 from# SET Port Monitor 9 from VS-1200 Data Acccess Switch Application # SET Port Monitor 5 from 1,3 # SET Port Monitor 6 from 1,3# SET Port Monitor 7 from 2,4 # SET Port Monitor 8 from 2,4Internet Warranty Customer ServiceLimits of Liability Datacom Systems Inc
Top Page Image Contents