Datacom Systems VS-1200 manual Show Groups SH GR Group Name, Tap

Page 20

20VS-1200 Data Acccess Switch

4.1.3.4SHOW TIME (SH TI)

This command displays the set date and time for the product, it is entered as shown:

>SHOW TIME (SH TI) DATE and TIME

Example: > SH TI

Date/Time 10-09-2007 12:40:25

4.1.3.5SHOW MANAGEMENT (SH MA)

This command displays Management RJ45 port information as shown:

>SHOW MANAGEMENT (SH MA) MAC Address

IP Address IP Subnet

IP Default Gateway IP Port

Example: > SH MA
MAC Address:	00-14-E2-00-23-9F
IP Address:	192.168.1.50
IP Subnet:	255.255.255.0
IP Default Gateway:	192.168.1.2
IP Port:	2370

4.1.3.6SHOW GROUPS (SH GR)

This command displays all ports as designated by the administrator (Superuser) as belonging to the same logical group. Specifically, groups can be configured as if they were a single logical port, enabling a high degree of control during both the initial setup and all subsequent moves or changes.

The GROUP NAME followed by the ports included in the group are displayed. It is entered and displays data as shown:

>SHOW GROUPS (SH GR) GROUP NAME

Port in group (Port number: Port name)

Port in group (Port number: Port name)

Example: > SH GR

TAP:

9:Port 9

10:Port 10

© 2009 Datacom Systems Inc

Image 20

Contents USERguide Page Product Description VS-1200 Data Acccess Switch Datacom Systems IncTable of Contents VS-1200 Series Functional Drawing Application Hardware InstallationCustomer Service Terms of Use Copyright License Agreement Trademark AttributionProprietary Notice Certifications and MarksSafety Notices and Warnings Overview VS-1200 Series SummaryVS-1200 Series Features and Benefits What Shipped?VS-1200 Series Common Specifications VS-1200 Series Model Specific SpecificationsPower Consumption 12W BTU/h Operating Range Relative Humidity 5 to 90% non-condensingPage VS-1210BT/SFP HardwareVS-1200 Series Front Panels Any-to-Any Ports PowerFront Panel Description Rear Panel Description Management PortPower Switch SFP series Input PowerSerial DB9 Rear Label BT seriesBasic Functionality Initial ConfigurationCommand Line Interface CLI Password Recovery Basic Commands Read Only AccessSET Port Monitor SE PO MO Show Groups SH GR Group Name TAPShow Port Routing SH PO RO Show Users SH US Superuser Commands Configuration AccessSU SET Password SU SE PA # SET IP Subnet Gateway SET Date MmddyySET Time Hhmmss # SE PO MO 3 OFFADD User AD US HyperTerminal Serial Port Configuration DB9Delete User Username Port Number Management Port Configuration RJ45TCP/IP Winsock Telnet IP Address ConfigurationIP Address Configuration with HyperTerminal Accessories Communications HyperTerminal VS-1200 Data Acccess Switch Initial Configuration IP Address Configuration with Telnet Network Connections Accessories Command Prompt Initial Configuration Exercise CLI Setting Ports Initial Configuration # SET Port Monitor 1 from 7,9 # SET Port Monitor 2 from 8,9# SET Port Monitor 5 from # SET Port Monitor 6 from 3,4# SET Port Monitor 7 from # SET Port Monitor 8 fromIntallation Prerequisites Safety GuidelinesSmall Form-Factor Plug Module Installing the SFP Module Removing the SFP ModulePage Any-to-Any Connection Hardware InstallationPower Management Connection VS-1200 Series Functional Drawing VS-1210BT-BT/SFPVS-1204BT VS-1204SFP Gathering the Data HyperTerminal configuration example ApplicationVS-1200 Data Acccess Switch # SET Port Monitor 9 from # SET Port Monitor 4 from# SET Port Monitor 6 from VS-1200 Data Acccess Switch Application # SET Port Monitor 5 from 1,3 # SET Port Monitor 6 from 1,3# SET Port Monitor 7 from 2,4 # SET Port Monitor 8 from 2,4Limits of Liability Customer ServiceInternet Warranty Datacom Systems Inc