Datacom Systems VS-1200 manual IP Address Configuration with Telnet

Page 32

32

VS-1200 Data Acccess Switch

Step 13. Type Exit to save the network address changes and press the Enter key to end the connection session indicated by 'Connection closed' response.

Step 14. Close HyperTerminal, respond 'Yes' to the "You are currently connected. Are you sure you want to disconnect now?' prompt and respond 'Yes, No or Cancel,' as you prefer, to the "Do you want to save the connection named "Connect"?" prompt.

Step 15. Disconnect the DRL512-2M-R serial cable.

Step 16. Install the VS-1200 series in your chosen network location.

4.4.2IP Address Configuration with TELNET

The IP address of the configurable series can be configured via a RJ45 connection with a TELNET application (available on most Windows PCs) or an open source free software terminal emulator for MS-Windows.

Step 1. Connect the VS-1200 with one of the supplied switching AC adapters and AC line cords into an external power source. Either POWER 1 or 2 LED illuminates green indicating power is available from the connected source. The other POWER LED is not illuminated, indicating a lack of power to the unconnected DC power socket.

Step 2. Using a cross-over Cat 5e cable, connect one end to the VS-1200 MANAGEMENT port and the other end to the RJ45 port on your management PC.

© 2009 Datacom Systems Inc

Image 32

Contents USERguide Page Product Description VS-1200 Data Acccess Switch Datacom Systems IncTable of Contents VS-1200 Series Functional Drawing Application Hardware InstallationCustomer Service Terms of Use Copyright License Agreement Trademark AttributionProprietary Notice Certifications and MarksSafety Notices and Warnings Overview VS-1200 Series SummaryVS-1200 Series Features and Benefits What Shipped?VS-1200 Series Common Specifications VS-1200 Series Model Specific SpecificationsPower Consumption 12W BTU/h Operating Range Relative Humidity 5 to 90% non-condensingPage VS-1210BT/SFP HardwareVS-1200 Series Front Panels Any-to-Any Ports PowerFront Panel Description Rear Panel Description Management PortPower Switch SFP series Input PowerSerial DB9 Rear Label BT seriesBasic Functionality Initial ConfigurationCommand Line Interface CLI Password Recovery Basic Commands Read Only AccessSET Port Monitor SE PO MO Show Groups SH GR Group Name TAPShow Port Routing SH PO RO Show Users SH US Superuser Commands Configuration AccessSU SET Password SU SE PA # SET IP Subnet Gateway SET Date MmddyySET Time Hhmmss # SE PO MO 3 OFFADD User AD US HyperTerminal Serial Port Configuration DB9Delete User Username Port Number Management Port Configuration RJ45TCP/IP Winsock Telnet IP Address ConfigurationIP Address Configuration with HyperTerminal Accessories Communications HyperTerminal VS-1200 Data Acccess Switch Initial Configuration IP Address Configuration with Telnet Network Connections Accessories Command Prompt Initial Configuration Exercise CLI Setting Ports Initial Configuration # SET Port Monitor 1 from 7,9 # SET Port Monitor 2 from 8,9# SET Port Monitor 5 from # SET Port Monitor 6 from 3,4# SET Port Monitor 7 from # SET Port Monitor 8 fromIntallation Prerequisites Safety GuidelinesSmall Form-Factor Plug Module Installing the SFP Module Removing the SFP ModulePage Any-to-Any Connection Hardware InstallationPower Management Connection VS-1200 Series Functional Drawing VS-1210BT-BT/SFPVS-1204BT VS-1204SFP Gathering the Data HyperTerminal configuration example ApplicationVS-1200 Data Acccess Switch # SET Port Monitor 9 from # SET Port Monitor 4 from# SET Port Monitor 6 from VS-1200 Data Acccess Switch Application # SET Port Monitor 5 from 1,3 # SET Port Monitor 6 from 1,3# SET Port Monitor 7 from 2,4 # SET Port Monitor 8 from 2,4Limits of Liability Customer ServiceInternet Warranty Datacom Systems Inc