Avaya G350 manual Required equipment

Before you start

Required equipment

Required equipment

You need the following equipment to assist you in the installation:

•One loop start analog trunk for connecting a modem.

•A separate telephone line for speaking to the service technician.

You may also need some of the following equipment for mounting the G350:

•A Phillips screwdriver if rack mounting or wall mounting the G350.

•If you will mount the G350 to a flat wall: screws to fasten the G350 to the wall.

•If you will mount the G350 to a non-flat wall:

•A 415 x 465 mm plywood board, 20 mm (0.79 in) thick.

•Wood screws to fasten the G350 to plywood.

•Screws to fasten the plywood board to the wall.

If you are installing an S8300 media server in the G350, you also need:

•One USB modem. The recommended USB modem is Multitech MultiModemUSB MT5634ZBA- USB-V92.

•One USB CD-ROM drive.

•A laptop computer with internet browser.

If you are not installing an S8300 media server in the G350, you also need:

•A PC on the local network with a CD-ROM drive.

•A laptop computer running Windows XP or Windows 2000 and with a serial port recognized by the operating system on the laptop. If the port is recognized, it is listed by the Device Manager.

•A modem to connect to the G350 to enable dial-in configuration. The recommended modem is the Multitech MultiModemZBA MT5634ZBA-V-V92.

Installation of the G350 Media Gateway	17
December 2003