Avaya G350 manual Connect non-IP telephones and trunks, Connecting an analog telephone

Connecting devices

Step 3: Connect non-IP telephones and trunks

Step 3: Connect non-IP telephones and trunks

This section describes how to connect analog and DCP telephones and analog and T1/E1 trunks to the G350.

Connecting an analog telephone

This section explains how to connect an analog telephone.

To connect an analog telephone:

1Wire a telephone port to one of the following analog ports:

—An analog telephone port on an MM711 or MM714 media module.

—One of the two fixed LINE ports on the G350 front panel.

2Plug the analog telephone into the telephone port.

NOTE:

The leftmost LINE analog telephone port on the G350 front panel forms a mechanical analog relay with the TRUNK port next to it. This relay can be configured to provide emergency transferred telephone service in the case of a power outage or disconnection from an external media server. Therefore, the analog telephone connected to LINE is usually installed for this emergency purpose. Regular analog telephones on the network are usually connected to other analog ports.

Figure 8: The MM711 media module

Figure 9: The MM714 media module

Installation of the G350 Media Gateway	45
December 2003