Avaya G350 manual Attach ground conductors, Inserting a media module

Installing the Avaya G350 Media Gateway

Step 3: Attach ground conductors

Figure 6: Inserting a media module

4Apply firm pressure to engage the connectors.

The media module connector has different length pins. The long pins will engage first to provide grounding. Medium length and short pins will provide power and signal.

5Lock the media module into the chassis by tightening the spring-loaded captive screws on the front of the module.

!DANGER:

To prevent access to electrical hazards by unauthorized personnel and to ensure continued compliance to international radiated emissions requirements, all captive screws must be securely tightened such that they cannot be loosened without the use of a tool.

! WARNING:

After you have connected telephones to the various media modules, be sure to add circuit protection to the lines (See Step 4: Install circuit protection on page 49).

Step 3: Attach ground conductors

To assure safe installation and operation, carefully read all requirements, recommendations and instructions. Pay special attention to all CAUTION, WARNING, and DANGER statements.

! WARNING:

System grounding must comply with the general rules for grounding provided in Article 250 of the National Electrical Code (NEC), National Fire Protection Agency (NFPA) 70, or the applicable electrical code in the country of installation.

Installation of the G350 Media Gateway	27
December 2003