Avaya manual Preparing a G350 with an S8300 for configuration

Page 36

Preparing for configuration

Step 1: Prepare configuration equipment

10Select Enable the modem and continue the installation remotely. The Connect Modem screen appears:

11Click Finish.

12Connect a serial modem to a working telephone line.

13Connect the provided DB-25 adapter to the modem.

14Disconnect the flat cable from the COM port of the laptop computer.

15Connect the flat cable to the DB-25 connector on the modem.

The G350 is now prepared for remote configuration via the modem. See Step 2: Assist the configuration on page 40) for information about how you will need to assist the supporting technician to configure the G350 from a remote location.

Preparing a G350 with an S8300 for configuration

If you installed an S8300 in the G350 and all the configuration will be done on-site, the G350 is ready for the supporting technician to set up the G350 for configuration and perform the configuration. You will need to assist the technician (see Assisting an on-site configuration on page 40).

If you installed an S8300 in the G350, and some or all of the configuration will be done remotely (see Step 2: Assist the configuration on page 40) prepare for configuration as follows:

1Connect and enable the USB modem. See Connecting the USB modem on page 37.

2If the supporting technician requires a USB CD-ROM drive to download software upgrades, connect the USB CD-ROM drive to the remaining available USB port on the S8300 module.

36

Installation of the G350 Media Gateway

 

December 2003

Image 36
Contents Installation of the Avaya G350 Media Gateway Copyright 2003, Avaya Inc All Rights Reserved SOC/REN Declarations of Conformity Contents Preparing for configuration Technical specifications Installation of the G350 Media Gateway Downloading this book and updates from the Web About this bookOverview AudienceSafety labels and security alert labels Security AlertRelated resources Technical assistanceTrademarks Within the USSending us comments Installation workflows Full installationBefore you start Installation of a staged G350 Gathering informationStaging Unpacking Site requirements Environmental VerificationRequired equipment Installation of the G350 Media Gateway Installing the Avaya G350 Media Gateway Mount the G350 chassisMounting the G350 in a rack Affixing a mounting bracket to the front of the G350 To attach each mounting bracket to the G350 To mount the G350 in the rackMounting the G350 on a wall Placing the G350 on a tableTo affix brackets to the G350 for wall mounting To affix the feetInstall the media modules Combination limitationsAllocating slots G350 front panel ports and slots Inserting the S8300 Media Server module To insert the S8300 Media Server moduleInserting media modules To insert a media moduleAttach ground conductors Inserting a media moduleGeneral grounding requirements Approved grounds Connect the safety ground To attach the ground wiresConnect power to the G350 To connect power to the G350Installation of the G350 Media Gateway Preparing for configuration Prepare configuration equipmentPreparing a G350 without an S8300 for configuration Installation of the G350 Media Gateway December Preparing a G350 with an S8300 for configuration Connecting the USB modem To connect and enable the modemInstallation of the G350 Media Gateway Installation of the G350 Media Gateway December Assist the configuration Assisting a remote configurationAssisting an on-site configuration Assisting a combined remote and on-site configurationAssisting an off-site configuration staging Installation of the G350 Media Gateway Connecting devices Connect the networkConnect IP telephones To connect an IP telephoneConnecting an analog telephone Connect non-IP telephones and trunksTo connect an analog telephone Connecting a DCP telephone To connect a DCP telephoneConnecting an analog trunk Connecting an E1/T1 trunkTo connect an analog trunk To connect an E1/T1 trunkConnecting an Isdn BRI trunk To connect an Isdn BRI trunkInstall circuit protection Over-Voltage and Sneak-Current ProtectionConnecting the G350 to the WAN Connect to the Wide Area Network WANTo connect the WAN to the G350 Install the Coupled Bonding Conductor Connecting an external router to the G350To install the CBC Install the Avaya Partner Contact Closure Adjunct To install the contact closureAfter installation Test the installationTesting telephones Testing trunksRemove the installation equipment LSP failover testingTechnical specifications G350 Media Gateway specificationsPower Cord Specifications Power Cord Specifications Index Installing the G350 chassis Installation of the G350 Media Gateway December Installation of the G350 Media Gateway