Axis Communications A1001 Create a New Hardware Configuration, Configure Locks and Door Monitors

Page 14

AXIS A1001 Network Door Controller & AXIS Entry Manager

System Configuration

Create a New Hardware Configuration

To create a new hardware configuration from the beginning:

1.Go to Setup > Hardware Configuration and click Start new hardware configuration .

If the product’s hardware has not been configured before or has been deleted, Hardware Configuration will be available in the notification panel in the Overview page.

2.Select a door option depending on the number of doors, one (1) or two (2), that will be connected to the Axis product.

3.Enter a descriptive name for each door and click Next. It is recommended to provide the doors with unique descriptive names so that they easily can be identifed by anyone who will administrate the system.

You can also edit the name of the Axis product. The default name includes the serial number for easy identification.

4.Select the door monitor and lock options that match the requirements and the type of lock connections that will be used and click Next. For more information, see Configure Locks and Door Monitors on page 14 and Lock Options on page 15.

5.Select the types of readers that will be used and click Finish. For more information, see Configure Readers and REX Devices on page 16 and Reader and REX Device Options on page 16.

6.In the dialog that appears after completing the configuration, click OK or click the link to view the hardware pin chart. To print the hardware pin chart, click Print Hardware Pin Chart on the Hardware Pin Chart page.

To cancel the hardware configuration, click Cancel. This can be done in any of the hardware configuration pages.

Configure Locks and Door Monitors

1.If a door monitor will be used, select Door monitor and then select the option that matches how the door monitor circuits will be connected.

2.If the door lock shall lock immediately after the door has been opened, select Cancel access time once door is opened.

3.Specify the door monitor time options or, if no door monitor will be used, the lock time options.

4.Select the options that match how the lock circuits will be connected.

5.If a lock monitor will be used, select Lock monitor and then select the options that match how the lock monitor circuits will be connected.

6.If the input connections from readers, REX devices, and door monitors shall be supervised, select Enable supervised inputs. For more information, see Use Supervised Inputs on page 16.

Note

•Most lock, door monitor, and reader options can be changed without resetting and starting a new hardware configuration. Go to Setup > Hardware Reconfiguration .

•You can connect one lock monitor per door controller. So if you use double-lock doors, only one of the locks can have a lock monitor. If two doors are connected to the same door controller, lock monitors cannot be used.

•Motorized locks must be configured as secondary locks.

Door Monitor Options

The following door monitor options are available:

•Door monitor – Selected by default. Each door has its own door monitor that, for example, will signal when the door has been forced open or open too long. Deselect if no door monitor will be used.

-Open circuit = Closed door – Select if the door monitor circuit is normally open. The door monitor gives the door open signal when the circuit is closed. The door monitor gives the door closed signal when the circuit is open.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Axis A1001 Network Door Controller & Axis Entry Manager Intellectual Property Rights Equipment Modifications About this DocumentLiability Trademark AcknowledgmentsSupport Learn MoreAxis A1001 Network Door Controller & Axis Entry Manager Hardware Overview Front and backInterface External power inputsPower outputs Color Indication LED IndicatorsLED indicators, buttons and other hardware For technical specifications, see Connectors and ButtonsExternal Power Inputs Power ConnectorPower Outputs Buttons and Other HardwareSet the Root Password Access from a BrowserAccess from the Internet Start a browser Chrome, Internet Explorer, Firefox, Safari Overview Configuration Step by Step Select a LanguageExport a Hardware Configuration File Configure the HardwareImport a Hardware Configuration File To import a hardware configuration fileTo create a new hardware configuration from the beginning Create a New Hardware ConfigurationConfigure Locks and Door Monitors Motorized locks must be configured as secondary locksLock Options Reader and REX Device Options Configure Readers and REX DevicesUse Supervised Inputs Following reader options are availableVerification Controls Verify the Hardware ConnectionsSet the Date and Time Get the Date and Time from the Computer Configure the Network SettingsSet the Date and Time Manually To enable card formats Configure Card FormatsBasic TCP/IP Settings Go to Setup Configure Card FormatsCard Format Descriptions Field MapsConnected Door Controllers in the System Manage Network Door ControllersDoor Controller System Status Connected Door Controllers ListRemove Door Controllers from the System Click Reset hardware configurationIP address MAC address Maintenance Instructions Choose a Workflow Access ManagementAbout Users Create and Edit Access Schedules Access Schedule TypesAdd Schedule Items Manage Doors Go to Access Management Groups tab, click Add new groupCreate and Edit Groups Group CredentialsClick Add scheduled unlock Identification TypesAdd Scheduled Unlock States Use Manual Door Actions Go to Access ManagementCreate and Edit Users Manual Door ActionsFollowing credentials are available for users User CredentialsImport Users First name required Last nameExample Access Schedule Combinations Export UsersCreate a Subtraction schedule called Nights & weekends View the Event Log View the Alarm LogConfigure the Event and Alarm Logs Event Log FiltersEvent Log Options Set Up Action RulesAlarm Log Options Triggers Access PointConfiguration Go to Events Action Rules and click AddDoor HardwareActions Add RecipientsRecipient Types Set Up Email RecipientsCreate Schedules Following recipients are availableEvent Wiegand Set Up RecurrencesReader Feedback Beeper pattern State Dual LED Single LEDClick View and print View, Print, and Export ReportsReport Types Click Print selected columnsUsers To enable Https on the Axis productSecurity IP Address FilterCertificates To allow the product to access a network protected by IeeeIeee Network Click Install certificate and upload the certificateDate & Time Create a self-signed certificate as described aboveLinux/Unix syntax Assign IP Address Using ARP/PingARP/Ping Linux/Unix exampleDNS Configuration Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service NTP ConfigurationHost Name Configuration Link-Local IPv4 AddressQoS Quality of Service Information, see the online helpMaintenance Ports & DevicesSystem Overview SupportSupport Overview Logs & ReportsScripting Reset to Factory Default SettingsAdvanced File UploadFirmware To upgrade the product’s firmware Upgrade the FirmwareEmergency Recovery Procedure UNIX/Linux, type the following from the command lineProduct cannot be accessed from a browser Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Product is accessible locally but not externallyStatus and Network indicator LEDs are flashing red rapidly Hardware failureAxis A1001 Network Door Controller Connectors Function/group Specifications General CasingPower WeightAxis Entry Manager Connectors Function Pin Specifications Reader Data ConnectorReader I/O Connector Function PinPower Connector Door ConnectorAuxiliary Connector Power & Relay Connector Network ConnectorPower Lock Connector Tampering Alarm Pin HeaderConnection Diagrams Back tampering alarmSupervised Inputs M5.7
Related manuals
Manual 20 pages 40.35 Kb
Top Page Image Contents