Axis Communications A1001 user manual Date & Time, Network

Page 43

AXIS A1001 Network Door Controller & AXIS Entry Manager

System Options

1.Create a self-signed certificate as described above.

2.Go to Setup > Additional Controller Configuration > System Options > Security > Certificates .

3.Click Create certificate signing request and provide the requested information.

4.Copy the PEM-formatted request and send to the CA of your choice.

5.When the signed certificate is returned, click Install certificate and upload the certificate.

Server/Client certificates can be installed as Certificate from signing request or as Certificate and private key. Select Certificate and private key if the private key is to be upload as a separate file or if the certificate is in PKCS#12 format.

The Axis product is shipped with several preinstalled CA certificates . If required, additional CA certificates can be installed:

1.Go to Setup > Additional Controller Configuration > System Options > Security > Certificates .

2.Click Install certificate and upload the certificate.

Date & Time

The Axis product’s date and time settings are configured under Setup > Additional Controller Configuration > System Options > Date & Time.

Current Server Time displays the current date and time (24h clock).

To change the date and time settings, select the preferred Time mode under New Server Time:

•Synchronize with computer time – Sets date and time according to the computer’s clock. With this option, date and time are set once and will not be updated automatically.

•Synchronize with NTP Server – Obtains date and time from an NTP server. With this option, date and time settings are updated continuously. For information on NTP settings, see NTP Configuration on page 45.

If using a host name for the NTP server, a DNS server must be configured. See DNS Configuration on page 45.

•Set manually – Allows you to manually set date and time.

If using an NTP server, select your Time zone from the drop-down list. If required, check Automatically adjust for daylight saving time changes.

Network

Basic TCP/IP Settings

The Axis product supports IP version 4 (IPv4).

The Axis product can get an IPv4 address in the following ways:

•Dynamic IP address – Obtain IP address via DHCP is selected by default. This means that the Axis product is set to get the IP address automatically via Dynamic Host Configuration Protocol (DHCP).

DHCP allows network administrators to centrally manage and automate the assignment of IP addresses.

•Static IP address – To use a static IP address, select Use the following IP address and specify the IP address, subnet mask and default router. Then click Save.

DHCP should only be enabled when using dynamic IP address notification, or if the DHCP can update a DNS server that makes it possible to access the Axis product by name (host name).

43

Page 42 Page 44
Image 43
Page 42 Page 44
Contents Axis A1001 Network Door Controller & Axis Entry Manager Trademark Acknowledgments About this DocumentLiability Intellectual Property Rights Equipment ModificationsLearn More SupportAxis A1001 Network Door Controller & Axis Entry Manager Front and back Hardware OverviewPower outputs External power inputsInterface LED indicators, buttons and other hardware LED IndicatorsColor Indication Power Connector Connectors and ButtonsExternal Power Inputs For technical specifications, seeButtons and Other Hardware Power OutputsStart a browser Chrome, Internet Explorer, Firefox, Safari Access from a BrowserAccess from the Internet Set the Root PasswordOverview Select a Language Configuration Step by StepTo import a hardware configuration file Configure the HardwareImport a Hardware Configuration File Export a Hardware Configuration FileMotorized locks must be configured as secondary locks Create a New Hardware ConfigurationConfigure Locks and Door Monitors To create a new hardware configuration from the beginningLock Options Following reader options are available Configure Readers and REX DevicesUse Supervised Inputs Reader and REX Device OptionsSet the Date and Time Verify the Hardware ConnectionsVerification Controls Set the Date and Time Manually Configure the Network SettingsGet the Date and Time from the Computer Go to Setup Configure Card Formats Configure Card FormatsBasic TCP/IP Settings To enable card formatsField Maps Card Format DescriptionsConnected Door Controllers List Manage Network Door ControllersDoor Controller System Status Connected Door Controllers in the SystemIP address MAC address Click Reset hardware configurationRemove Door Controllers from the System Maintenance Instructions About Users Access ManagementChoose a Workflow Access Schedule Types Create and Edit Access SchedulesAdd Schedule Items Group Credentials Go to Access Management Groups tab, click Add new groupCreate and Edit Groups Manage DoorsAdd Scheduled Unlock States Identification TypesClick Add scheduled unlock Manual Door Actions Go to Access ManagementCreate and Edit Users Use Manual Door ActionsFirst name required Last name User CredentialsImport Users Following credentials are available for usersExport Users Example Access Schedule CombinationsCreate a Subtraction schedule called Nights & weekends Event Log Filters View the Alarm LogConfigure the Event and Alarm Logs View the Event LogAlarm Log Options Set Up Action RulesEvent Log Options Go to Events Action Rules and click Add Access PointConfiguration TriggersHardware DoorAdd Recipients ActionsFollowing recipients are available Set Up Email RecipientsCreate Schedules Recipient TypesBeeper pattern State Dual LED Single LED Set Up RecurrencesReader Feedback Event Wiegand Click Print selected columns View, Print, and Export Reports Report Types Click View and printIP Address Filter To enable Https on the Axis productSecurity UsersIeee To allow the product to access a network protected by IeeeCertificates Create a self-signed certificate as described above Click Install certificate and upload the certificateDate & Time NetworkLinux/Unix example Assign IP Address Using ARP/PingARP/Ping Linux/Unix syntaxNTP Configuration Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service DNS ConfigurationLink-Local IPv4 Address Host Name ConfigurationInformation, see the online help QoS Quality of ServicePorts & Devices MaintenanceLogs & Reports SupportSupport Overview System OverviewFile Upload Reset to Factory Default SettingsAdvanced ScriptingUNIX/Linux, type the following from the command line Upgrade the FirmwareEmergency Recovery Procedure Firmware To upgrade the product’s firmwareProduct is accessible locally but not externally Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Product cannot be accessed from a browserHardware failure Status and Network indicator LEDs are flashing red rapidlyAxis A1001 Network Door Controller Weight Function/group Specifications General CasingPower ConnectorsAxis Entry Manager Connectors Function Pin Reader Data ConnectorReader I/O Connector Function Pin SpecificationsAuxiliary Connector Door ConnectorPower Connector Tampering Alarm Pin Header Network ConnectorPower Lock Connector Power & Relay ConnectorBack tampering alarm Connection DiagramsSupervised Inputs M5.7
Related manuals
Manual 20 pages 40.35 Kb
Top Page Image Contents