AXIS A1001 Network Door Controller & AXIS Entry Manager
Access Management
2.Create a day shift hours Schedule item that recurs
3.Create two groups, one Group called Guards and one Group called Day shift personnel. See page 27.
4.Drag the predefined Always access schedule to the Guards group.
5.Drag the Day shift hours access schedule to the Day shift personnel group.
6.Add the Card number and PIN and Card number only identification types to the door’s reader.
7.Drag the predefined Always access schedule to the Card number and PIN identification type.
8.Drag the Day shift hours access schedule to the Card number only identification type.
9.Drag the door to both groups. Then add users to the groups as required. See page 29.
Example
To create a schedule combination that
•grants guards access to a door at all times,
-using their card during day shift hours
-using their card and PIN before and after day shift hours, and that
•grants day shift personnel access to the same door every day between 6 a.m. and 4 p.m.,
-using their card during day shift hours, while
-using their card and PIN during nights and weekends:
1.Create an Addition schedule called Day shift hours. See page 25.
2.Create a day shift hours Schedule item that recurs
3.Create a Subtraction schedule called Nights & weekends.
4.Create a nights and weekends Schedule item that recurs
5.Drag the predefined Always schedule and the Nights & weekends access schedule to the Day shift personnel group.
6.Create two groups, one Group called Guards and one Group called Day shift personnel. See page 27.
7.Drag the predefined Always access schedule to the Guards group and the Day shift personnel group.
8.Drag the Nights & weekends access schedule to the Day shift personnel group.
9.Add the Card number and PIN and Card number only identification types to the door’s reader.
10.Drag the predefined Always access schedule to the Card number and PIN identification type.
11.Drag the Day shift hours access schedule to the Card number only identification type.
12.Drag the door to both groups. Then add users to the groups as required. See page 29.
32