Bay Technical Associates V80 PDI-2, V79 PDI-1 owner manual PDI-2 AC Input Setup

3.2PDI-2 AC INPUT SETUP

The PDI-2 module has two banks of dip switches which are used to add ripple filtering for AC inputs. AC input is selected by individual channel. Location of the dip switches is shown in Figure 3.

CHANNEL	SW1	SW2
1	1
2	2
3	3		Figure 3
4	4
5	5
6	6
7	7
8	8
9		1
10		2
11		3
12		4
13		5
14		6
15		7
16		8

Table 1

Dip switch SW1 1-8 provides filtering control for channels 1-8 while SW2 1-8 controls channels 9-16. Refer to Table 1 to determine which switch corresponds to a particular channel. A port is configured for AC operation by positioning the corresponding switch to ON position.

NOTE: The default setting for SW 1-8 and SW2 1-8 is "OFF" (AC filtering disabled).

6