Aiwa NSX-AV900 Vocal Fadeiumultiplex Functions, Recommended microphones, Multiplex*2, Cancel

Recommended microphones

The use of unidirectional type microphones is recommended to prevent howling. Contact your local Aiwa dealer for details.

m

●When a connected microphone is used, the SURROUND system and the DOLBY PRO LOGIC are automatically canceled.

●If a microphone is held too near the speakers, a howling sound may be produced. In this case, hold the microphone away from the speakers, or decrease the sound level using the MIC MIXING control.

●If sound through the microphone is extremely loud, it may be distorted. In this case, turn the MIC MIXING control toward MIN.

VOCAL FADEIUMULTIPLEX FUNCTIONS

VOCAL FADER/

MULTIPLEX

— .,_,,, 1 .—. .—. —.

it

k-

This unit. can use discs or tapes as Karaoke sources.

Press the VOCAL FADEWMULTIPLEX button repeatedly to select the vocal fader or multiplex function.

Use the vocal fader function for ordinary discs or tapes. Use the multiplex function for multi audio discs or tapes.

Each time the VOCAL FADER/MULTIPLEX button is pressed, one of these functions is selected cyclically.

‘1To change the time lag setting of the Auto Vocal Fader . or Auto Multiplex function

When Auto Vocal Fader or Auto Multiplex is selected, “A-VF or “A-MPX is displayed for 3 seconds and changes to the selected function name. After the selected function name is displayed, hold down the VOCAL FADER/MULTIPLEX button until the desired time lag setting, SLOW or FAST, is selected.

SLOW

Fade out of original singer’s voice returns to the normal level if there is no audio input from the microphone within 2 seconds.

FAST

Fade out of original singer’s voice returns to the normal level if there is no audio input from the microphone within 0.5

seconds.

When the power is turned off, the Auto vocal fader and Auto multiplex restore to SLOW.

*2 To change the muted channel of the Multiplex function When Multiplex is selected, “MPX-L”is displayed for 3 seconds and changes to selected function name. After the selected function name is displayed, hold down the VOCAL FADER/ MULTIPLEX button until the channel to be output from both speakers, MPX-L or MPX-R, is selected.

MPX-L

The sound on the left channel is heard from both speakers and the sound on the right channel is muted.

MPX-R

The sound on the right channel is heard from both speakers and the sound on the left channel is muted,

When the power is turned off, the Multiplex restores to MPX-L.

When using the remote control

Press the KARAOKE button.

●The VOCAL FADER functions may not operate correctly with the following kinds of CDs or tapes.

-Those with monaural sound

-Those recorded with strong echoes

-Those with the vocal part recorded on the right or left side of the sound width

●While the VOCAL FADER function is on, the sound is output as monaural.

x

+

1

I*

Vocal Fader

The singer’s voice becomes softer than the accompaniment.

Auto Vocal Fader*’

The singer’s voice becomes softer only while there is audio input through a microphone,

Multiplex*2

The sound on the left (or right) channel is heard from both speakers, and the sound on the right (or left) channel is muted.

Auto Multiplex*’

The soundon the left(or right)channelis heardfrombothspeakers,andthe sound on the rightchannelis mutedonly while

there is audio input through a microphone.

Cancel

11

19 ENGLISH