Chapter 5 ADU Server Configuration
| The following settings are on the Debug tab of the ADU Server Editor. |
|
|
Name | Description |
|
|
logfilesize | The maximum size of the log file. The default log file size is 2,560,000 bytes. The |
| minimum is 1000 bytes and the maximum is 50,000,000 bytes. |
|
|
Ping Interval | The number of seconds between messages that are sent to a server to determine if it |
pingtimer | is running. The default is 60 seconds and the minimum is 1 second. |
|
|
trace | The trace parameter can contain any number of the following settings, comma |
| separated, no spaces permitted. This following list works for MTT servers. STT |
| servers have some minor differences.. |
| idl – Whether requests, responses and events are logged |
| flush – Whether the logged information if forced to disk after each significant |
| operation |
| timing – Whether requests have timing information logged |
| explain – Whether requests explain which server they were sent to, and why |
| on – Whether logging happens at all |
| thread – Whether each log entry contains the id of the thread that wrote it |
| usr1 through usr8 – For use by third party implementers. |
| dev1 – reserved |
| appverbose – Used by individual applications. |
| appwarn – Used by individual applications. |
| debug – Used by individual applications. |
| debug2 – Used by individual applications. |
|
|
Note: Previous versions of Avaya IC included the ADU History Server. To support existing installations, send the events to an existing ADU History Server.
1Use the default for the Eventsink parameter (HISTMAP.EventsIn) to send events to the Reporting server.
2Set the Reporting servers’s eventforward parameter to ADUHS.EventsIn. The Reporting server forwards all ADU events to the ADUHS.