3.4 Loading Ribbon
Ribbon is required with thermal transfer media. If your printer is equipped with the thermal transfer option and if you will be using thermal transfer media, load ribbon as follows:
1. Open the cover.
2. Remove both Ribbon Hubs.
Push in and lift 
to remove the Hubs
3. Slide a roll of Ribbon onto one of the Ribbon Hubs and an Empty Core onto the other hub.
Slide a Ribbon onto a Hub and | Ribbon | |||
an Empty Core onto a Hub |
|
| ||
|
|
|
|
|
Empty Core |
|
| ||
|
| |||
|
| |||
4. Push the Printhead Latch down and raise the Printhead Carrier Assembly.
5. Slide the Media Type Switch into the ‘Transfer’ position.
Direct
Media Type Switch
Transfer
| 15 |