Datamax E-4304e, E-4203, E-4204 manual Align Length Stop Location

19) ALIGN LENGTH		20) STOP LOCATION
Leading edge distance of two		Sets label stopping (and in certain cases
successive labels. Must be entered if		the starting) location for different printer
‘LABEL ALIGNMENT’ is set to		configurations.
Yes (see Section 4.5).		Possible Values:
Possible Values:
		* HOST	(uses host values of ‘SOP’
0 – 999; default =100*
			and ‘PRESENT ADJUST’)
(Units = .01 inch)		PEEL	(sets the stop location just
			behind the peel bar of the
			optional Peel Mechanism)
		CUT	(sets stop location at the
			blade of the optional Media
			Cutter)
		COVER	(sets stop location at the tear
			plate on the printer’s cover)
		NONE	(uses normal start location
			and ignores the host
			command)
21) INPUT MODE
Selects between the standard or
template interpretation of incoming
data.
Possible Values:
* DPL	(printer constructs the label
	using the standard DPL
	commands)
LINE	(printer constructs the label
	using a preloaded template
	form)

* = Default Setting

;Note: All of the menu items listed in the previous section are stored in non- volatile memory.

E-4203/E-4204/E-4304 25