Datamax E-4304e, E-4203, E-4204 manual ~Or~

Problem	Possible Cause		Solution
First label is	Alignment Length is	¾	Set Label Alignment to AUTO,
wasted during	too long.		press and hold FEED until
alignment. All			paper moves for automatic
labels thereafter			Label Alignment length
print to the correct			measurement.
start of print	~OR~		~OR~
position.
		¾	Re-measure Label Alignment
			Length, use Menu Setup to set
			new length, ensure desired
	For labels whose		length has been set.
	length and stop	¾	Obtain a slightly different label
	position cause them		Alignment Length
	to stop between		measurement. Using the Label
	labels on the media		Alignment AUTO mode, hold
	sensor, the		the FEED button to force an
	alignment function		alignment and label
	can result in wasted		measurement. Ensuring slack
	labels.		in the label stock may result in
			a slightly different
			measurement. The Alignment
			Length may also be set
			manually via the Setup Menu.
			Increasing or decreasing the
			value by 1 or 2 units (in./100)
			may help to prevent the wasted
			labels; however, this may
			result in incorrect print
			positions for labels that are
			short in length.

E-4203/E-4204/E-4304 31