4.4.1 Printer Setup Menu List
The Printer Setup Menu List label, shown below, contains the printer’s current values for each menu item that can be modified via the front panel (See Section 4.4.2 for a detailed item description.)
The Menu Item Numbers correspond to the item’s position in the Menu List for selection when pressing the 
button during the Printer Setup Procedure (see Section 4.4). For example to “Direct Select” the BAUD RATE Menu Item press and hold the 
button for 7 flashes of the FAULT Light or for the TOF GAIN item hold 
for 12 flashes, etc.
Menu Item | Values | Menu | ||
Numbers |
|
| Items | |
|
|
|
|
|
|
|
|
| |
| 1) | DIRECT | = MEDIA TYPE | |
| 2) | EDGE | = SENSOR TYPE | |
| 3) | NO | = PRESENT SENSOR | |
| 4) | NO | = CUTTER EQUIPPED | |
| 5) | 127 | = SOP ADJUST, 0.005 in. | |
| 6) | 127 | = PRESENT ADJUST, 0.005 in. | |
| 7) | 9600 | = BAUD RATE, bps | |
| 8) | 8 |
| = DATA BITS |
| 9) | STD | = CONTROL CODES | |
| 10) | 100 | = CONT FORM LENGTH, 0.01 in. | |
| 11) | 3 |
| = OOS MAXVOLT, 0.1 Volts |
| 12) | 12 |
| = TOF GAIN |
| 13) | 10 |
| = TOF DELTA, 0.1 Volts |
| 14) | 0 |
| = TOF LOW, 0.1 Volts |
| 15) | 416 | = LABEL WIDTH, 0.01 in. | |
| 16) | 64 |
| = SCALABLE FONT, 4KB |
| 17) | 64 |
| = INTERNAL MODULE, 4KB |
| 18) | NO | = LABEL ALIGNMENT | |
| 19) | 100 | = ALIGNMENT LENGTH, 0.01 in. | |
| 20) | HOST | = STOP LOCATION | |
| 21) | DPL | = INPUT MODE | |
|
|
|
|
|
;Note: When using narrow media, the ‘Menu Items’ column may be truncated.
22 |
|