ATI Technologies X1650 manual To connect your monitors

• Refer to your Windows® online help and documentation for further information on using the Settings tab.

Note: When you use multiple monitors with your card, one monitor will always be Primary. Any additional monitors will be designated as Secondary.

Click Extend my Windows desktop onto this monitor.

Select the Monitor icon identified by the number 2.

2

3

4 Set the Screen Resolution and Color Quality as appropriate for the second monitor. Click Apply or OK to apply these new values.

Windows® can detect the new hardware settings.

4 When the New Hardware Found Wizard appears, at the appropriate prompt insert the ATI Installation CD to load the drivers for your Radeon® X1650 PRO card.

To set up a multi-monitor display

1 From the Start button click Control Panel, then Display. Click the Settings tab to access the basic multi-monitor configuration settings.

Note: ATI provides Catalyst™ Control Center software that provides many additional configuration features. It can be accessed by clicking the Advanced button from the Display Properties > Settings tab.

8

Note: If you use multiple monitors, the Radeon® X1650 PRO card must be the primary graphics card. Normally, the system BIOS determines which graphics card will be the primary.

Note: The top DVI-I connector is single-link and the bottom connector is dual-link.

Note: Some Radeon® X1650 PRO graphic cards have one DVI-I connector and one VGA connector.

To connect your monitors

1Power off your computer and monitors.

2Plug the monitor cables into their appropriate connectors.

3Power on your monitors first, and then restart your computer so that