Connecting to HDTV 15
The HDTV Component Video Adapter can be used in place of the standard A/V Output cable to connect to an HDTV or other component input device, using component video cables.
You must have a monitor attached to your computer before installing the ATI HDTV. For proper operation of your ATI Component Video Adapter, ATI display drivers must be correctly installed.
ATI HDTV Cable
1ATI HDTV Video Output Cable
2Backplate of the ATI Graphics Card
3Male RCA Patch Cables – available from consumer electronics dealer
4Typical HDTV Video Input Connections
Note: Input and output cables lengths should not exceed 50 feet (15m).
Installing your ATI HDTV video cable
1Turn on your component input device, and set it to YPbPr input.
Note: See your HDTV or component input device manual for configuration information specific to your device.