American Dryer Corp Phase 7.2.2 user manual Auto Reverse Mode On OFF

2: PROGRAM “A-F” CYCLE

SELECT “A-F” KEY
*	(“*” DISPLAY THE LETTER CHOSEN. DEFAULTS TO “A”)
SELECT CYCLE TYPE
*	(“*” DISPLAY THE CYCLE TYPE “AUTO” or “MANUAL”)

AUTO

0:REVERSE MODE

ON OFF

1:ENTER DRY TEMP 160° F TO 200° F (71° C TO 93° C)

*** F	(“***” = THE DEFAULT DRY TEMP FOR THAT CYCLE)
2: ENTER DRYNESS LEVEL FINISH, DRY, EXTRA DRY
*** %	(“***” = THE DEFAULT DRY LEVEL FOR THAT CYCLE)

3:ENTER CYCLE ADJUSTMENT LEVEL 0 TO 99 (75 = DEFAULT)

4:ENTER CONTROLLED COOL DOWN

(OFF = DEFAULT VALUE)

5:ENTER COOL DOWN TIME 0 TO 90 MINUTES (4 = DEFAULT VALUE)

6:ENTER COOL DOWN TEMPERATURE 70° F TO 100° F (21° C TO 38° C) (80 = DEFAULT VALUE)

MANUAL

0:REVERSE MODE

ON OFF

1:ENTER SPIN TIME 30 TO 120-SECONDS

*** SEC	(60 = THE DEFAULT TIME FOR THAT CYCLE)
ENTER STOP TIME 5 TO 10-SECONDS
*** SEC	(5 = THE DEFAULT TIME FOR THAT CYCLE)
2: ENTER DRY TEMP 100° F TO 200° F (38° C TO 93° C)
*** F	(“***” = THE DEFAULT DRY TEMP FOR THAT CYCLE)
ENTER CONTROLLED COOL DOWN ON OR OFF
(OFF = DEFAULT)
3: ENTER DRY TIME 0 TO 99 MINUTES
** MIN	(0 = THE DEFAULT MINUTES FOR THAT CYCLE)
4: ENTER COOL DOWN TIME 0 TO 99 MINUTES
** MIN	(4 = THE DEFAULT TIME FOR THAT CYCLE)
5: ENTER COOL DOWN TEMP 70° F TO 100° F (21° F TO 38° C)
*** F	(100 = THE DEFAULT TEMP FOR THAT CYCLE)

6:ENTER STEAM INJECTION ON OR OFF (OFF = DEFAULT VALUE)

3:PROGRAM “0-40” CYCLE

1:SEE 2: PROGRAM “A-F” CYCLE

4:DEFAULT SETTINGS

ENTER PASSWORD (PRESS “1” “2” “3”)

CONFIRM DEFAULTS

NO	(DEFAULT VALUE)
YES

28