To alter the programming parameters, the operator will locate the parameter (program) that is to be changed. If the change is numerical (i.e., time and/or temperature), the operator will simply enter the numerical value desired. If an error is made, press the “STOP/CLEAR” 
key ONCE and the incorrect entry that was made will be cancelled. Once the entry is made and the parameter (program) set does not need to be changed, press the “START/ENTER” 
key, and the Phase 7
If the parameter (program) change is a feature change, such as changing the temperature conversion from degrees Fahrenheit (°F) to degrees Celsius (°C) or from “AUTO” (Automatic Drying Cycle – [Patent No. 4,827,627]) to “MANUAL” (Timed [Manual] Drying Cycle), the operator will press and hold the “UP ARROW” 
or “DOWN ARROW” 
key. This will toggle between choices. Once the entry is made, or if the parameter (program) does not need to be changed, press the “START/ENTER” 
key and the Phase 7
When making numerical changes, please stay within the programming limits shown. If an erroneous entry is made, the Phase 7 
key is pressed; it will return to the numerical value previously set.
The Phase 7 
key until the Phase 7
24