American Dryer Corp Phase 7.2.2 user manual DRY or Extra Extra DRY, Enter Cycle Adjustment

Page 65

From

Previous

(A)

Press the up or

down arrow key to adjust the dryness level. FINISHING,

DRY OR EXTRA

DRY

EXTRA DRY

Press ENTER to store

new changes

3: ENTER CYCLE

ADJUSTMENT

Press ENTER to access

Press the up arrow key
to increment the value,	70
the down arrow key to	70
decrement the value or
enter the value
directly.

7

5

Next

Page (A)

From

Previous

(B)

Press ENTER to store

new changes

1:ENTER DRY TIME 0 TO 99 MINUTES

Press ENTER to access

30

	4	Press the up arrow
	4	key to increment the
		time, the down arrow
	5	key to decrement the
		time or enter the time
		directly.
		directly.

45

		Press ENTER to store
		new changes
	2: ENTER DRY TEMP	Axial models will
	2: ENTER DRY TEMP	display a maximum
	100 TO 200 ºF	display a maximum
	100 TO 200 ºF	temp of 160 ºF
		temp of 160 ºF

Next

Page (B)

63

Image 65

Contents NON-COIN Retain This Manual In a Safe Place For Future Reference Table of Contents Section Phase 7 NON-COIN Auto Cycle Patent no ,827,627 Section Features Keyboard Touch Pad Symbols = STOP/CLEAR key Preprogrammed Cycles Program SelectionsPage Timed Manual Drying Cycle Operation Manually Loaded CyclesAutomatic Drying Cycle Patent no ,827,627 Operations Light Emitting Diode L.E.D. DOT Matrix Display Cycle in Progress Temperature DisplayTemperature Conversion Status Preprogrammed Cycle Preview Wrinkle Guard ProgramAudio Alert on Times 0 to Program Locations DiagnosticsReversing Option Page Preprogrammed Locations for Custom Drying Operating Sequence Operating InstructionsPage Page MAN Operating Notes Fire Suppression System F.S.S. Theory of Operation System ResetFire Suppression System F.S.S. Valve Check Page E.D. Display Operating Status D. Display MessagesIntroduction to Programming Programming InstructionsPage START/ENTER STOP/CLEAR Programming FlowchartsPhase Menu Programming Procedure Page Auto Reverse Mode On OFF 0SELECT Language Selecting LanguagesEnglish EspanolSelecting a Dryer Model Dryer SetupSelect System Parameters Select ModelGAS REVERSING, Electric REVERSING, Steam REVERSING, GAS NON GAS ReversingSteam NON-REVERSING Electric ReversingSelecting the System Temperature DEG C Enter Lint Cleaning Frequency 1 to 10 HoursDEG F Setting the Lint Cleaning Frequency Enter Audio Alert on Times 0 to Adjusting the Audio Alert On times System Temp Rotation Sensor Rotation Sensor Press Enter to jump directly to the location Board Address 00 to ZZ OFFDryer Address To ZZ Auto Cycle Time OUT to 99 Minutes Auto Cycle Time Out Enter Audio Alert on Times 0 to Rotation Sensor System Temp Enter Lint Cleaning Frequency 1 to 10 HoursAuto Cycle Time OUT To 99 Minutes Adjusting Reversing Spin Time and Stop Time Enter Stop Time 5 to 10 Seconds Reversing SetupEnter Spin Time 30 to 120 Seconds Press the up arrow key to increment Wrinkle Guard Audio Alert SetupWrinkle Guard Audio Alert Wrinkle Guard SetupSteam Injection Setup Wrinkle Guard Setup Steam Injection Setup Cycle Enter 1ST on TimeEnter 1ST OFF Time 511 to 000 First time adjustment is Minutes mmEnter 2ND on Time Program 0-40 Cycles Enter 3RD on TimeProgram System Cycles Parameters Programming a F Cycles or 0 40 CyclesSelect a F KEY Reverse ModeSelect Cycle Type AutoEnter DRY Temp Not AvailableOFF Not Available TimeEnter Stop Time To 10 Seconds Enter Dryness LevelDRY Enter DRY Time 0 to 99 Minutes Enter Cycle AdjustmentDRY or Extra Extra DRY Enter Cool Down Time 0 to 99 Minutes Controlled Cool DownEnter Cool Down Enter Cool Down Temp 70 to 100 ºFSteam Injection Cycle Enter 1ST on Time 511 to From Previous Enter 2ND on Time Enter 3RD on Time Restoring Factory Default Settings Enter Password Confirm Defaults YES Defaults SET Default SettingsCycle 0-40 Parameters Programs Preset by the Factory Cycle A-F Parameters Programs Preset by the FactoryPreprogrammed Cycles Fixed Parameters System Parameters Program LocationsGas Standards Diagnostic L.E.D. Display Fault MessagesPage Page Page S.S. Diagnostic Conditions Brhl RED L.E.D INPUT/OUTPUT I/O Board L.E.D. IndicatorsKeyboard Touch PAD Layout Customer Custom Parameter Settings Auto Programmed Cycle Page ADC Part No 08/19/08