SECTION I
INTRODUCTION
Phase 7 Non-Coin Microprocessor Controller (Computer) Drying System
The Phase 7 Non-Coin Microprocessor Controller (Computer) Drying System has been designed with super performance in mind to provide for better temperature regulation, efficiency, performance, consistency, and faster drying times.
Among its many amenities, the Phase 7 Non-Coin Microprocessor Controller (Computer) Drying System has a true Automatic Drying Cycle. The Phase 7 Non-Coin Automatic Drying Cycle (Patent No. 4,827,627) principle is based on one (1) of the most fundamental laws of thermodynamics, which governs the flow of heat in thermal systems.
Utilizing this Phase 7 non-coin microprocessor controller (computer) technology, the user simply has to place the load in the dryer and push one (1) single button to start the drying cycle. The Phase 7 non-coin microprocessor controller (computer) will directly monitor the moisture content in the load and stop the drying cycle automatically when the selected dryness level is reached.
The Phase 7 Non-Coin Automatic Drying Cycle (Patent No. 4,827,627) virtually eliminates ALL guesswork. The Phase 7 non-coin microprocessor controller (computer) determines how much drying time is needed and compensates for various types of fabrics and load sizes, therefore, avoiding damage to fabrics by overdrying, as well as avoiding wasted time and energy for any given load. Once the Phase 7 non-coin microprocessor controller (computer) determines that the load is dry, the Phase 7 non-coin microprocessor controller (computer) will go into the Cool Down Cycle until the preprogrammed time or temperature is reached, and then will shut the dryer off automatically.