Hand Held Products 600, 800 manual Printing Data, To check the print buffer during operation

Page 64

♦To check the print buffer during operation:

1.Display the menu that begins with Print Results.

If scan results are displayed on the verifier, press SELECT.

If a menu (for example, a change setting menu) is displayed on the verifier, press POWER repeatedly.

2.Press POWER.

3.Press ↑.

The on-demand print buffer display screen appears. The display provides the percent of the memory used for the stored records and the number of scan records in the memory. You can respond in one of three ways: a.)

Cont., b.) Prnt or c.) Cir. The cursor is at the asterisk next to Continue.

3.a To continue obtaining scan results, press SELECT. The opening

display appears. You can then scan a symbol.

3.b To print the stored records, press → to place the cursor on the asterisk next to Print. Then press SELECT. The stored records print. Once printed, the stored results are removed from the verifier’s memory; however, the results from the last scan remain in the buffer. (Press ← to display the last scan’s results.)

3.c To clear (delete) the records stored in the memory, press →

twice to place the cursor on the asterisk next to Clear and then press SELECT. The stored results and the results from the last scan are deleted from the verifier’s memory.

Printing Data

When a printer is attached to the verifier and turned on, you can print the current scan results stored in the buffer. For this discussion, “current data” are data from a scan that you just took and whose results are on the verifier’s display, or data from a scan that you will perform momentarily. “Stored data” are scan records stored or saved in the buffer. There are two ways to print current data — using the AutoPrint/Store feature or through the Print Results menu. There are also two methods to print stored data — through the Print Results menu or through the Print Buffer menu.

To print results, the Printer type (QCP or QCHSP) in the Printer Options menu must match the type of printer you have connected to the verifier. If the connected printer and the displayed printer abbreviation do not match, the printout will be illegible.

♦To print current data:

1.Connect the verifier and the printer and turn on both units. Be sure the Printer type setting in the Output Options, Print Options menu matches the type of printer to which the verifier is connected. Refer to "Changing the Out- put Options" on page 3-12for instructions.

5 - 2

Quick Check® 600/800 Series User’s Guide

Page 63 Page 65
Image 64
Page 63 Page 65
Contents User’s Guide For European Community Users DisclaimerWaste Electrical and Electronic Equipment Information Table of Contents Reviewing Scan Data Saving and Printing Chapter Customer Support Getting Started About This GuideUnpacking the Quick Check 600/800 Verifier SymbolDescription Power or Select or ↑, ↓, ←, →Term in manual Term in software Noting the Verifier’s Features Quick Check 600/800 VerifierEAN/UPC Special Features DisplayLEDs ButtonsPorts Installing the Batteries SpecificationsSpecification Charging the Batteries To Install the BatteriesTo charge the batteries Turning the Unit On and Off To turn on the unitNo Printer Attached, then refer to .a Quick Check 600/800 Series User’s Guide To turn off the unit Calibrating the Quick Check 600/800 VerifierTo calibrate the Quick Check 600/800 Verifier To scan properly using a mouse wand To scan properly using a pen wandProperly Scanning With the Unit Accessories and Options Cleaning the WandItem/DescriptionOrder code Documentation Quick Check 600/800 Series User’s Guide Quick Start Guide Review the option settings Print your scan resultsChanging the Specifications Changing the SettingsSymbologies Symbologies Symbology Specifications Symbology Parameters defaults are in boldMagnification Factor Expand U.P.C./EOCheck Options Modes ShownCharacter Font & Tolerances Character Translation Table Code 128, Code 16K, and CodeTo modify the symbology options Wide-to-Narrow RatioFixed Message Length → or SelectIndustry Applications Scan Grade Changing the Test CriteriaTo select an application ISO/IEC grades DecodabilityNumber of Scans Changing the Scanning Options To return to the previous menu, press PowerTo change the test criteria Beeper Pitch Extended AccuracyDecode Direction To change the scanning optionsDisplay Options Changing the Output OptionsParameter Result Lines Print Options AutoPrint/StoreTo change the output options Scan ProfileTo change the display options Resetting the Default Settings Locking the SettingsTo reset a unit To change the printout optionsUsing a Command Code About Command CodesC./EAN/JAN Enable On or Off Generic Code SelectionsChoosing a Command Code Customized Command CodesTo create a customized Command Code To use a customized Command CodeTo request a Command Code from Hand Held Products Quick Check 600/800 Series User’s Guide Reviewing Scan Results Reviewing Scan DataScan Grades ISO/IEC Symbol Grade Determining the ISO/IEC Symbol Grade Quick Check 600/800 Series User’s Guide To obtain the scan grade and ISO/IEC Symbol grade Reviewing a Scan ExampleQuick Check 600/800 Series User’s Guide LED Display To review data from the last scanAudio Sounds Bar growth LCD bar growth LED lit Tolerance used IndicationReviewing the Dimensional Parameters Errors in Dimensional ParametersParameter Trad’l Parameter ResultTo review the dimensional parameters CalculatingReviewing the Reflectance Parameters Errors in Reflectance Parameters PCSSymbol Contrast, Minimum and Maximum Reflectance To review the reflectance parametersErrors in Format Parameters Reviewing the Format ParametersTo review the format procedures Reviewing MessagesSstr Codes Using Sstr Codes to Review DataSstr Code Type Test Criteria Name Using the Quick Check Verifier as a Reflectometer To quickly review data using Sstr Codes To return the customized display to the default display To customize the result displayTo use the Quick Check Verifier as a static reflectometer Saving and Printing Saving DataChecking the Print Buffer During Operation To save scan dataPrinting Data To check the print buffer during operationTo clear delete the records stored in the memory, press → To print current dataTo print stored data Deleting Stored DataTo stop printing Reviewing the Printouts Interfacing With a ComputerTo delete stored data QCP and Qchsp Printouts Using the QCP or Qchsp Printing GuidelinesSwitch Position Function To install or replace the QCP or Qchsp paper roll To set up the QCP or QchspTo turn on and off the QCP or Qchsp To remove the ribbon from the QCP or Qchsp To perform a QCP or Qchsp self-test Troubleshooting the QCP or Qchsp Quick Check 600/800 Series User’s Guide Background Information General Bar Code InformationSymbology Specifications Symbology Industries OrganizationGS1 formerly UCC and EAN Symbology Characteristics Quick Check 600/800 Series User’s Guide How a Bar Code Verifier Works Symbology Character Set WidthsElement Additional Information Quick Check 600/800 Series User’s Guide Using DataMatch Understanding the DataMatch FeatureDownloading DataMatch Structuring and Loading the Database SYM Identifier CodeDecode To load the database into the verifierQuick Check 600/800 Series User’s Guide Selecting the DataMatch Feature To select DataMatchReviewing DataMatch Results Quick Check 600/800 Series User’s Guide Using a Quick Check 800 Verifier General OperationReflectance-Based Information Percent Decoded/Scanned ModeScanProfile Output Print Results Calculate Decoded/Scanned Change Settings Change Settings Test Criteria #Scans/Symbol nnn Error, Application, and Type Messages Type Display Message Printout MessageDatabase ECV /VCVS Bookland Quick Check 600/800 Series User’s Guide Ccbba Hibcc EAN ITF SCS /ITF EAN SCS Quick Check 600/800 Series User’s Guide Flow Charts Quick Check 600/800 Series User’s Guide Quick Check 600/800 Series User’s Guide Quick Check 600/800 Series User’s Guide Quick Check 600/800 Series User’s Guide Quick Check 600/800 Series User’s Guide Sstr Codes Quick Check 600/800 Series User’s Guide Special Codes Quick Check 600/800 Series User’s Guide Unrecognized Symbols Unrecognized SymbolsQuick Check 600/800 Series User’s Guide Troubleshooting To restore the displayCustomer Support To check the software versionLatin America Limited Warranty Quick Check 600/800 Series User’s Guide Page Hand Held Products, Inc
Top Page Image Contents