Hand Held Products 800, 600 manual Reviewing a Scan Example

Page 49

Reviewing a Scan Example

To clarify the difference between a scan grade and a symbol grade, this section presents an example of how you might set up your verifier, scan the symbols and review the results. In this example, we change the verifier settings and see how they affect the results.

1.To begin, we set up the verifier with the following settings:

•Test Criteria Passing Option set to ISO/IECISO/IEC; the letter grade selected does not matter

•Scanning Options Extended Accuracy set to 3; note that this setting affects the scan grade.

2.Scan a bar code symbol.

After the first scan, a message appears stating we have two more scans to go (of the same scan path or line across the symbol) to

satisfy the preset Extended Accuracy setting of 3.

3.Continue to scan the same line of the symbol for a total of three scans. After the third scan, the scan grade appears on the display (the scan grade is the lowest of the grades of all of the parameters, in this case, averaged for the three scans).

We now have the scan grade for a specific path across the symbol.

4.Scan another line or path of the symbol three times to obtain a second scan grade.

After the third scan of the second set, a different display appears. This display is the value we set for the #Scans/Symbol (2) and the number of scan grades used to determine the symbol grade.

Note: If you set the Test Criteria Passing to traditional rather than to ISO/IEC grade, the scan grade is reported as Pass or Fail. The verifier does not report an ISO/IEC symbol grade when you select “traditional.”

♦To obtain the scan grade and ISO/IEC Symbol grade:

1.Enter the Scanning Options Extended Accuracy setting you want. This set- ting determines the number of scans of the same path you want used to cal- culate the scan grade.

If you set the Test Criteria Passing setting to ISO/IEC, you can obtain the ISO/IEC symbol grade:

•Enter the Test Criteria Passing setting to an ISO/IEC grade

•Set the Test Criteria #Scans/Symbol setting to the value you want. This setting determines the number of scans grades you want to use to calculate the final symbol grade.

Refer to Chapter 3, Changing the Settings for instructions on changing the settings.

2.Scan the bar code symbol.

The first line of this display provides the symbol or application name and the encoded scan data. If the first line of scan data exceeds 16 characters in

length, a right arrowhead appears as the rightmost character of the display. Press → on the verifier to review all the decoded data. A left arrowhead

Quick Check® 600/800 Series User’s Guide

4 - 5

Page 48 Page 50
Image 49
Page 48 Page 50
Contents User’s Guide For European Community Users DisclaimerWaste Electrical and Electronic Equipment Information Table of Contents Reviewing Scan Data Saving and Printing Chapter Customer Support About This Guide Getting StartedUnpacking the Quick Check 600/800 Verifier SymbolDescription Power or Select or ↑, ↓, ←, →Term in manual Term in software Quick Check 600/800 Verifier Noting the Verifier’s FeaturesEAN/UPC Display Special FeaturesLEDs ButtonsPorts Installing the Batteries SpecificationsSpecification Charging the Batteries To Install the BatteriesTo charge the batteries To turn on the unit Turning the Unit On and OffNo Printer Attached, then refer to .a Quick Check 600/800 Series User’s Guide To turn off the unit Calibrating the Quick Check 600/800 VerifierTo calibrate the Quick Check 600/800 Verifier To scan properly using a mouse wand To scan properly using a pen wandProperly Scanning With the Unit Accessories and Options Cleaning the WandItem/DescriptionOrder code Documentation Quick Check 600/800 Series User’s Guide Quick Start Guide Print your scan results Review the option settingsChanging the Specifications Changing the SettingsSymbologies Symbologies Symbology Parameters defaults are in bold Symbology SpecificationsExpand U.P.C./EO Magnification FactorCheck Options Modes ShownCharacter Translation Table Code 128, Code 16K, and Code Character Font & TolerancesWide-to-Narrow Ratio To modify the symbology optionsFixed Message Length → or SelectIndustry Applications Scan Grade Changing the Test CriteriaTo select an application ISO/IEC grades DecodabilityNumber of Scans Changing the Scanning Options To return to the previous menu, press PowerTo change the test criteria Extended Accuracy Beeper PitchDecode Direction To change the scanning optionsDisplay Options Changing the Output OptionsParameter Result Lines AutoPrint/Store Print OptionsTo change the output options Scan ProfileTo change the display options Locking the Settings Resetting the Default SettingsTo reset a unit To change the printout optionsAbout Command Codes Using a Command CodeGeneric Code Selections C./EAN/JAN Enable On or OffCustomized Command Codes Choosing a Command CodeTo create a customized Command Code To use a customized Command CodeTo request a Command Code from Hand Held Products Quick Check 600/800 Series User’s Guide Reviewing Scan Results Reviewing Scan DataScan Grades ISO/IEC Symbol Grade Determining the ISO/IEC Symbol Grade Quick Check 600/800 Series User’s Guide Reviewing a Scan Example To obtain the scan grade and ISO/IEC Symbol gradeQuick Check 600/800 Series User’s Guide To review data from the last scan LED DisplayBar growth LCD bar growth LED lit Tolerance used Indication Audio SoundsErrors in Dimensional Parameters Reviewing the Dimensional ParametersParameter Trad’l Parameter ResultCalculating To review the dimensional parametersReviewing the Reflectance Parameters PCS Errors in Reflectance ParametersTo review the reflectance parameters Symbol Contrast, Minimum and Maximum ReflectanceReviewing the Format Parameters Errors in Format ParametersReviewing Messages To review the format proceduresSstr Codes Using Sstr Codes to Review DataSstr Code Type Test Criteria Name To quickly review data using Sstr Codes Using the Quick Check Verifier as a ReflectometerTo return the customized display to the default display To customize the result displayTo use the Quick Check Verifier as a static reflectometer Saving Data Saving and PrintingChecking the Print Buffer During Operation To save scan dataTo check the print buffer during operation Printing DataTo clear delete the records stored in the memory, press → To print current dataTo print stored data Deleting Stored DataTo stop printing Reviewing the Printouts Interfacing With a ComputerTo delete stored data QCP and Qchsp Printouts Printing Guidelines Using the QCP or QchspSwitch Position Function To install or replace the QCP or Qchsp paper roll To set up the QCP or QchspTo turn on and off the QCP or Qchsp To remove the ribbon from the QCP or Qchsp To perform a QCP or Qchsp self-test Troubleshooting the QCP or Qchsp Quick Check 600/800 Series User’s Guide General Bar Code Information Background InformationSymbology Industries Organization Symbology SpecificationsGS1 formerly UCC and EAN Symbology Characteristics Quick Check 600/800 Series User’s Guide How a Bar Code Verifier Works Symbology Character Set WidthsElement Additional Information Quick Check 600/800 Series User’s Guide Understanding the DataMatch Feature Using DataMatchDownloading DataMatch Structuring and Loading the Database SYM Identifier CodeTo load the database into the verifier DecodeQuick Check 600/800 Series User’s Guide To select DataMatch Selecting the DataMatch FeatureReviewing DataMatch Results Quick Check 600/800 Series User’s Guide General Operation Using a Quick Check 800 VerifierReflectance-Based Information Percent Decoded/Scanned ModeScanProfile Output Print Results Calculate Decoded/Scanned Change Settings Change Settings Test Criteria #Scans/Symbol nnn Type Display Message Printout Message Error, Application, and Type MessagesDatabase ECV /VCVS Bookland Quick Check 600/800 Series User’s Guide Ccbba Hibcc EAN ITF SCS /ITF EAN SCS Quick Check 600/800 Series User’s Guide Flow Charts Quick Check 600/800 Series User’s Guide Quick Check 600/800 Series User’s Guide Quick Check 600/800 Series User’s Guide Quick Check 600/800 Series User’s Guide Quick Check 600/800 Series User’s Guide Sstr Codes Quick Check 600/800 Series User’s Guide Special Codes Quick Check 600/800 Series User’s Guide Unrecognized Symbols Unrecognized SymbolsQuick Check 600/800 Series User’s Guide To restore the display TroubleshootingCustomer Support To check the software versionLatin America Limited Warranty Quick Check 600/800 Series User’s Guide Page Hand Held Products, Inc
Top Page Image Contents