Hand Held Products 600, 800 manual Changing the Scanning Options, To change the test criteria

Page 34

Consider the symbol grade as the average resulting from scans you take from all over the symbol. The ISO/IEC standard requires you to obtain ten scans of each symbol.

For example, you might sample the symbol at ten different paths in the symbol

—four in the upper portion, two in the middle and four in the lower portion. Multiple scans of the same symbol across different scan paths take advantage of the vertical redundancy of bar codes and give you a more accurate value of the symbol’s overall print quality.

♦To change the test criteria:

1.Display the menu that begins with Print Results (press POWER and then SELECT).

2.Set the cursor on the asterisk next to Change Settings and then press SELECT. A menu that begins with Specifications appears.

3.Set the cursor on the asterisk next to Test Criteria and then press SELECT. A menu that begins with Passing appears.

•To change the pass/fail criteria, set the cursor on the asterisk next to the term Passing and then press SELECT or →. The cursor moves to the right of Passing. Press ↑ and ↓ until the grade (Trad’l, ISO/IEC

“A,” ISO/IEC “B,” ISO/IEC “C,” ISO/IEC “D,”) you want appears. To save the selection, press SELECT, POWER or ←. The cursor moves back to the asterisk next to Passing.

•To change the Decodability, set the cursor on the asterisk next to Decodability and then press SELECT or →. The setting changes between ISO/IEC and Avg.

•To change the Grades, set the cursor on the asterisk next to Grades and then press SELECT or →. The setting changes between Letters and Numbers.

•To change the number of scans used to determine the final ISO/

IEC Symbol Grade, set the cursor on the asterisk next to #Scans/ Symbol and then press SELECT or →. The cursor moves to the right of the terms #Scans/Symbol. Press ↑ and ↓ until the numeric value

you want (1 through 10, 12, 15, 20, 30, 50, 100 or Var) appears. To save the selection, press SELECT or ←. The cursor moves back to the asterisk next to #Scans/Symbol.

When you exit any menu (press POWER), all the displayed parameter choices are saved.

4.To return to the previous menu, press POWER.

To scan a symbol, set the wand on the symbol’s quiet zone.

Changing the Scanning Options

The scanning options apply to the general operation of the Quick Check 600/800 Verifier. You can change the following options:

3 - 10

Quick Check® 600/800 Series User’s Guide

Page 33 Page 35
Image 34
Page 33 Page 35
Contents User’s Guide For European Community Users DisclaimerWaste Electrical and Electronic Equipment Information Table of Contents Reviewing Scan Data Saving and Printing Chapter Customer Support Getting Started About This GuideUnpacking the Quick Check 600/800 Verifier SymbolDescription Power or Select or ↑, ↓, ←, →Term in manual Term in software Noting the Verifier’s Features Quick Check 600/800 VerifierEAN/UPC LEDs Special FeaturesDisplay ButtonsPorts Installing the Batteries SpecificationsSpecification Charging the Batteries To Install the BatteriesTo charge the batteries Turning the Unit On and Off To turn on the unitNo Printer Attached, then refer to .a Quick Check 600/800 Series User’s Guide To turn off the unit Calibrating the Quick Check 600/800 VerifierTo calibrate the Quick Check 600/800 Verifier To scan properly using a mouse wand To scan properly using a pen wandProperly Scanning With the Unit Accessories and Options Cleaning the WandItem/DescriptionOrder code Documentation Quick Check 600/800 Series User’s Guide Quick Start Guide Review the option settings Print your scan resultsChanging the Specifications Changing the SettingsSymbologies Symbologies Symbology Specifications Symbology Parameters defaults are in boldCheck Options Magnification FactorExpand U.P.C./EO Modes ShownCharacter Font & Tolerances Character Translation Table Code 128, Code 16K, and CodeFixed Message Length To modify the symbology optionsWide-to-Narrow Ratio → or SelectIndustry Applications Scan Grade Changing the Test CriteriaTo select an application ISO/IEC grades DecodabilityNumber of Scans Changing the Scanning Options To return to the previous menu, press PowerTo change the test criteria Decode Direction Beeper PitchExtended Accuracy To change the scanning optionsDisplay Options Changing the Output OptionsParameter Result Lines Print Options AutoPrint/StoreTo change the output options Scan ProfileTo change the display options To reset a unit Resetting the Default SettingsLocking the Settings To change the printout optionsUsing a Command Code About Command CodesC./EAN/JAN Enable On or Off Generic Code SelectionsChoosing a Command Code Customized Command CodesTo create a customized Command Code To use a customized Command CodeTo request a Command Code from Hand Held Products Quick Check 600/800 Series User’s Guide Reviewing Scan Results Reviewing Scan DataScan Grades ISO/IEC Symbol Grade Determining the ISO/IEC Symbol Grade Quick Check 600/800 Series User’s Guide To obtain the scan grade and ISO/IEC Symbol grade Reviewing a Scan ExampleQuick Check 600/800 Series User’s Guide LED Display To review data from the last scanAudio Sounds Bar growth LCD bar growth LED lit Tolerance used IndicationParameter Trad’l Reviewing the Dimensional ParametersErrors in Dimensional Parameters Parameter ResultTo review the dimensional parameters CalculatingReviewing the Reflectance Parameters Errors in Reflectance Parameters PCSSymbol Contrast, Minimum and Maximum Reflectance To review the reflectance parametersErrors in Format Parameters Reviewing the Format ParametersTo review the format procedures Reviewing MessagesSstr Codes Using Sstr Codes to Review DataSstr Code Type Test Criteria Name To return the customized display to the default display Using the Quick Check Verifier as a ReflectometerTo quickly review data using Sstr Codes To customize the result displayTo use the Quick Check Verifier as a static reflectometer Checking the Print Buffer During Operation Saving and PrintingSaving Data To save scan dataTo clear delete the records stored in the memory, press → Printing DataTo check the print buffer during operation To print current dataTo print stored data Deleting Stored DataTo stop printing Reviewing the Printouts Interfacing With a ComputerTo delete stored data QCP and Qchsp Printouts Using the QCP or Qchsp Printing GuidelinesSwitch Position Function To install or replace the QCP or Qchsp paper roll To set up the QCP or QchspTo turn on and off the QCP or Qchsp To remove the ribbon from the QCP or Qchsp To perform a QCP or Qchsp self-test Troubleshooting the QCP or Qchsp Quick Check 600/800 Series User’s Guide Background Information General Bar Code InformationSymbology Specifications Symbology Industries OrganizationGS1 formerly UCC and EAN Symbology Characteristics Quick Check 600/800 Series User’s Guide How a Bar Code Verifier Works Symbology Character Set WidthsElement Additional Information Quick Check 600/800 Series User’s Guide Downloading DataMatch Structuring and Loading the Database Using DataMatchUnderstanding the DataMatch Feature SYM Identifier CodeDecode To load the database into the verifierQuick Check 600/800 Series User’s Guide Selecting the DataMatch Feature To select DataMatchReviewing DataMatch Results Quick Check 600/800 Series User’s Guide Using a Quick Check 800 Verifier General OperationReflectance-Based Information Percent Decoded/Scanned ModeScanProfile Output Print Results Calculate Decoded/Scanned Change Settings Change Settings Test Criteria #Scans/Symbol nnn Error, Application, and Type Messages Type Display Message Printout MessageDatabase ECV /VCVS Bookland Quick Check 600/800 Series User’s Guide Ccbba Hibcc EAN ITF SCS /ITF EAN SCS Quick Check 600/800 Series User’s Guide Flow Charts Quick Check 600/800 Series User’s Guide Quick Check 600/800 Series User’s Guide Quick Check 600/800 Series User’s Guide Quick Check 600/800 Series User’s Guide Quick Check 600/800 Series User’s Guide Sstr Codes Quick Check 600/800 Series User’s Guide Special Codes Quick Check 600/800 Series User’s Guide Unrecognized Symbols Unrecognized SymbolsQuick Check 600/800 Series User’s Guide Customer Support TroubleshootingTo restore the display To check the software versionLatin America Limited Warranty Quick Check 600/800 Series User’s Guide Page Hand Held Products, Inc
Top Page Image Contents