Ositech comm 614006-001 manual Media Access Module 10BaseT Network Connection

Section Two

The second method of connecting to a 10BaseT Network is via the Media Access Module. A female RJ-45 connector is provided on the Media Access Module for 10BaseT Network connections.

To connect the Trumpcard to a 10BaseT Network connection using the Media Access Module, follow these steps:

•For a multi-function Trumpcard, the Ethernet connection is identified on the back of the PC Card. Insert the PCMCIA Ethernet Adapter connector on the Media Access Module into the one marked Ethernet.

•Plug the male RJ-45 connector from the Network access cable into the female RJ-45 connector on the Media Access Module.

Note:	The Trumpcard is keyed to go in one way only. If you feel resistance
	before it is fully inserted, remove it, turn it over, and re-insert it.

Media Access Module 10BaseT Network Connection

2 - 4 Trumpcard Ethernet LAN