Ositech comm 614006-001 manual Copyright, How To Contact Us

Page 2

Copyright

Information in this document is subject to change without notice.

Copyright 1995-1997 by Ositech Communications Inc., Guelph, Ontario, Canada.

Ositech Communications Inc. shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the furnishing, performance, or use of this material.

Trumpcard is a trademark of Ositech Communications Inc.

P/N: 614006-001 Revision 3.0

How To Contact Us

At Ositech Communications, we make every effort to provide our customers with products that fit their needs and work well. If you wish to communicate with technical support, sales, or any other department at Ositech, please contact us in one or more of the following ways:

Ositech Communications Inc.

679 Southgate Drive

Guelph, Ontario, Canada

N1G 4S2

Toll Free Telephone:	1-888-OSITECH (1-888-674-8324)
Local Telephone:	(519) 836-8063
Facsimile:	(519) 836-6156
24 HR Bulletin Board Service
(519) 836-1196
[8-N-1, up to 33.6 KBPS]
Internet: World Wide Web		http://www.ositech.com
FTP		ftp.ositech.com
E-Mail		support@ositech.com
		sales@ositech.com

ii

Image 2

Contents Trumpcard Ethernet LAN User’s Guide and ReferenceHow To Contact Us CopyrightPreface FCC Notice Contents Appendices Introduction Section OneTrumpcard Ethernet LAN Section Two Hardware InstallationPreparing for Installation Installing the Trumpcard Ethernet LAN Connecting to 10BaseT Twisted Pair Networks Media Access Module 10BaseT Network Connection Interface Cabling and Pinout Twisted Pair Network Characteristics ConcentratorsConnecting to 10Base2 Thin Ethernet Networks Thin Coax Ethernet Segment Meter segments unless all LAN adapters and repeaters Thin Ethernet Network Characteristics Characteristics Standard Length Extended Length SegmentLink LED Green Media Access Module LED IndicatorsActivity LED RED Section Two Operation Section ThreeSocket Services and Card Services Multi-Function ConfigurationNetwork Software Installation Banyan Vines\DOS\OTCETH.DOS \DOSDEVICE=C\DECNET\OTCETH.DOS FTP Software LanWatchDEVICE=C\DECNET\PROTMAN.SYS /IC\DECNET Call \DECNET\STARTNETIBM LAN Server Operation IBM LAN Support Program \LSP\NETBIND \LANMAN\NETBIND Microsoft LAN ManagerMicrosoft Windows for Workgroups \WFW\311 PATH=C\NOVELL\NET.CFG OSI$OTCETHCD \NOVELL DEVICE=C\WINDOWS\IFSHLP.SYS\WINDOWS\NETSTART LSLMicrosoft Windows NT NetworkPRIORITY=MS$NETBEUI MS$OTCETH$NIC Microsoft Workgroup Connection for DOS\DOS\NET Start Ndis Generic BINDINGS=MS$OTCETH$NIC LANABASE=0Novell Netware for DOS PathNetware Netx Novell Netware for OS/2 \NETWARE\OS2\OTCETH.SYSNovell Unixware Dlpi Driver Accompanying the PC Card for more details SCO Unix LLI Driver Init Single User Mode Appendices Section FourMedia media type Appendix a ODI KeywordsFrame frame type Port I/O port INT interrupt levelMEM memory location Node Address nnnnnnnnnnnnLook Ahead Size look ahead value Protocol named protocol protocol id frame typeSocket socket number Frame ETHERNET802.3 Media 10BASET Exclusive Dislink INTMEM= memory location Appendix B Ndis KeywordsMEDIA= media type NETADDRESS= ‘nnnnnnnnnnnn’ INTERRUPT= interrupt levelIOBASE= I/O port SOCKET= socket numberPROTOCOL.INI Example DRIVERNAME=STACK$ BINDINGS=OSITECHNIFAppendix C Messages Failed to register with Multi-Function ManagerOnly supported on Pcmcia 2.x or higher Socket/Card Services Failed to register with Card ServicesUnable to configure Trumpcard Pcmcia adapter not foundHardware not responding Expected Tuple not foundMust be an AT .286 or higher system No Media Cable ConnectedODI Specific Error Messages Section Four