Section Four
APPENDIX A – ODI Keywords
The following ODI keywords are supported by the Trumpcard ODI drivers. The keywords must be in the NET.CFG file under the line LINK DRIVER OTCETH and must be indented in by at least one space. If the keyword is not present, the default value shown will be assumed.
FRAME < frame type >
Description: Frame type used by the driver
Default: Ethernet_802.2
Accepted values: Ethernet_802.3 , Ethernet_II , Ethernet_SNAP, Ethernet_802.2
Note: | Make sure the frame type matches that used by the server. |
MEDIA <media type>
| Description: Media type selected by the driver |
| Default: AUTO |
| Accepted Values: 10BASE2 or BASE2, 10BASET or BASET, AUTO |
Note: | If you are using the dual media Trumpcard network PC Card, setting |
| this keyword to 10Base2 or 10BaseT will force that media type |
| connection only. By default, the driver will try to determine which |
| media is connected by first trying 10BaseT, and then 10Base2. |
EXCLUSIVE
| Description: Put Trumpcard in LAN only mode |
| Default: |
Note: | If the Trumpcard is a |
| disable the other function as long as the network driver is loaded. If |
| the other function is already in use the driver will report an error. |
DISLINK
Description: Disable link poll mode
Default: Enable link
4 - 2 | Trumpcard Ethernet LAN |