Operation
7.Complete NETSETUP and return to the DOS prompt. The PROTOCOL.INI file in your DECNET directory should appear something like the following:
[protocol manager]
DRIVERNAME=PROTMAN$
[IPX4MAC]
DRIVER=IPX$MAC BINDINGS=OTCETH.DOS
[DATALINK]
DRIVERNAME=LL$MAC LG_BUFFERS=16 SM_BUFFERS=6 OUTSTANDING=32
HEURISTICS=6
BINDINGS=OTCETH.DOS
[OTCETH.DOS]
DRIVERNAME=OTCETH$
| Your CONFIG.SYS file should contain the following lines : |
| DEVICE=C:\DECNET\PROTMAN.SYS /I:C:\DECNET |
| DEVICE=C:\DECNET\OTCETH.DOS |
| Your AUTOEXEC.BAT file should contain the following line: |
| CALL \DECNET\STARTNET |
Note: | Keyword specifications associated with the NDIS driver are explained |
| in Appendix B, Error Messages in Appendix C. |
FTP Software LanWatch
The Ositech Trumpcard hardware and software supports promiscuous mode operation, allowing it to work with products such as FTP's LanWatch.
The Ositech Trumpcard NDIS device driver installation will be automated to work with LanWatch once copied over to your hard disk.
1.Create a directory on the C: drive called NDIS (i.e. MD C:\NDIS).
2.Copy the files OTCETH.DOS and PROTOCOL.INI from the \FTP directory on Trumpcard driver diskette to \NDIS directory on C: drive (i.e. COPY A:\FTP\OTCETH.DOS C:\NDIS).
3.Run LANWatch install program (i.e. INSTALL).
User’s Guide and Reference | 3 - 5 |