Ositech comm 614006-001 manual Network Software Installation, Banyan Vines

Page 23

Operation

Network Software Installation

In order to assist with the installation and configuration of networks drivers, Ositech has provided Installation Software for the DOS / Windows and OS/2 operating systems. Follow the instructions printed on the

 

appropriate diskette label for details on how to invoke the Installation

 

Software. For operating systems other than DOS / Windows and OS/2,

 

please refer to the appropriate section for instructions on how to install

 

and configure the Network driver under these operating systems.

 

The following sections provide details on how to install and configure the

 

Trumpcard Ethernet Network drivers. The Network operating systems

 

have been listed alphabetically.

Note:

If the Trumpcard you are using provides other functions in addition to

 

Ethernet networking, please refer to the Installation Manual

 

accompanying the Trumpcard for details on how to operate the

 

functions simultaneously.

Banyan VINES

To install Banyan VINES version 4.x and later on a DOS NDIS workstation, you must manually install the Ositech Trumpcard NDIS device driver.

1.Follow the instructions for workstation installation

in accordance with your Banyan VINES workstation installation manual.

2.At this point you should have all the relevant Banyan VINES files in a directory on your hard disk drive. (In this manual we will assume that the Banyan Vines directory is called \VINES).

3.Copy the files PROTOCOL.INI and OTCETH.DOS from the \VINES directory on the Trumpcard driver diskette to the Banyan VINES directory.

(i.e. COPY A:\VINES\OTCETH.DOS C:\VINES)

4.Use an ASCII text editor and edit the CONFIG.SYS file to include the following lines:

DEVICE=C:\VINES\PROTMAN.DOS /I:C:\VINES

DEVICE=C:\VINES\OTCETH.DOS

(The command to edit the file is EDIT C:\CONFIG.SYS)

5. Change to the \VINES directory.

User’s Guide and Reference

3 - 3

Image 23
Contents User’s Guide and Reference Trumpcard Ethernet LANCopyright How To Contact UsPreface FCC Notice Contents Appendices Section One IntroductionTrumpcard Ethernet LAN Section Two Hardware InstallationPreparing for Installation Installing the Trumpcard Ethernet LAN Connecting to 10BaseT Twisted Pair Networks Media Access Module 10BaseT Network Connection Interface Cabling and Pinout Concentrators Twisted Pair Network CharacteristicsConnecting to 10Base2 Thin Ethernet Networks Thin Coax Ethernet Segment Meter segments unless all LAN adapters and repeaters Characteristics Standard Length Extended Length Segment Thin Ethernet Network CharacteristicsLink LED Green Media Access Module LED IndicatorsActivity LED RED Section Two Section Three OperationMulti-Function Configuration Socket Services and Card ServicesBanyan Vines Network Software Installation\DOS \DOS\OTCETH.DOSCall \DECNET\STARTNET FTP Software LanWatchDEVICE=C\DECNET\PROTMAN.SYS /IC\DECNET DEVICE=C\DECNET\OTCETH.DOSIBM LAN Server Operation IBM LAN Support Program \LSP\NETBIND \LANMAN\NETBIND Microsoft LAN ManagerMicrosoft Windows for Workgroups PATH=C\NOVELL\NET.CFG OSI$OTCETH \WFW\311LSL DEVICE=C\WINDOWS\IFSHLP.SYS\WINDOWS\NETSTART CD \NOVELLNetwork Microsoft Windows NTPRIORITY=MS$NETBEUI MS$OTCETH$NIC Microsoft Workgroup Connection for DOS\DOS\NET Start BINDINGS=MS$OTCETH$NIC LANABASE=0 Ndis GenericPath Novell Netware for DOSNetware Netx \NETWARE\OS2\OTCETH.SYS Novell Netware for OS/2Novell Unixware Dlpi Driver Accompanying the PC Card for more details SCO Unix LLI Driver Init Single User Mode Section Four AppendicesMedia media type Appendix a ODI KeywordsFrame frame type Node Address nnnnnnnnnnnn INT interrupt levelMEM memory location Port I/O portFrame ETHERNET802.3 Media 10BASET Exclusive Dislink INT Protocol named protocol protocol id frame typeSocket socket number Look Ahead Size look ahead valueMEM= memory location Appendix B Ndis KeywordsMEDIA= media type SOCKET= socket number INTERRUPT= interrupt levelIOBASE= I/O port NETADDRESS= ‘nnnnnnnnnnnn’DRIVERNAME=STACK$ BINDINGS=OSITECHNIF PROTOCOL.INI ExampleFailed to register with Multi-Function Manager Appendix C MessagesPcmcia adapter not found Failed to register with Card ServicesUnable to configure Trumpcard Only supported on Pcmcia 2.x or higher Socket/Card ServicesNo Media Cable Connected Expected Tuple not foundMust be an AT .286 or higher system Hardware not respondingODI Specific Error Messages Section Four