Ositech comm 614006-001 manual Ndis Generic, BINDINGS=MS$OTCETH$NIC LANABASE=0

Page 35

Operation

[MS$NETBEUI] Drivername=netbeui$ SESSIONS=6 NCBS=12

BINDINGS=MS$OTCETH$NIC LANABASE=0

Note:	Keyword specifications associated with the NDIS driver are explained
	in Appendix B, Error Messages in Appendix C.

NDIS (Generic)

These steps outline how to install the Trumpcard NDIS device driver for Network operating systems that are not described in this manual, and will operate with a NDIS driver. The easiest way to perform the installation is to install a NDIS driver that is supported by the Network operating system, and then edit the required files to use the Trumpcard NDIS driver. These steps will apply to both DOS and OS/2 environments.

The 3COM Etherlink driver will be used as an example, but any NDIS driver will do.

1.Follow the instructions for workstation installation in the installation manual.

2.When prompted for the adapter, select any of the available ethernet adapters that support NDIS (i.e. 3COM

ETHERLINK).

3.Continue with the installation until complete.

4.After the automatic installation has completed, you must make changes to your CONFIG.SYS and PROTOCOL.INI files, as well as copying over the Trumpcard NDIS driver.

5.First edit the CONFIG.SYS file on the root C:> drive. This is done by using a standard text editor such as EDIT in DOS or E in OS/2.

6.In the CONFIG.SYS file, locate the lines that are related to the Network operating system being used. Typically the lines would be:

DEVICE=C:\<path>\PROTMAN.SYS /I:<path>

DEVICE=C:\<path>\ELNK.DOS <-- DOS

or

DEVICE=C:\<path>\ELNK.OS2 <-- OS2

User’s Guide and Reference

3 - 15

Image 35

Contents User’s Guide and Reference Trumpcard Ethernet LANCopyright How To Contact UsPreface FCC Notice Contents Appendices Section One IntroductionTrumpcard Ethernet LAN Section Two Hardware InstallationPreparing for Installation Installing the Trumpcard Ethernet LAN Connecting to 10BaseT Twisted Pair Networks Media Access Module 10BaseT Network Connection Interface Cabling and Pinout Concentrators Twisted Pair Network CharacteristicsConnecting to 10Base2 Thin Ethernet Networks Thin Coax Ethernet Segment Meter segments unless all LAN adapters and repeaters Characteristics Standard Length Extended Length Segment Thin Ethernet Network CharacteristicsLink LED Green Media Access Module LED IndicatorsActivity LED RED Section Two Section Three OperationMulti-Function Configuration Socket Services and Card ServicesBanyan Vines Network Software Installation\DOS \DOS\OTCETH.DOSCall \DECNET\STARTNET FTP Software LanWatchDEVICE=C\DECNET\PROTMAN.SYS /IC\DECNET DEVICE=C\DECNET\OTCETH.DOSIBM LAN Server Operation IBM LAN Support Program \LSP\NETBIND \LANMAN\NETBIND Microsoft LAN ManagerMicrosoft Windows for Workgroups PATH=C\NOVELL\NET.CFG OSI$OTCETH \WFW\311LSL DEVICE=C\WINDOWS\IFSHLP.SYS\WINDOWS\NETSTART CD \NOVELLNetwork Microsoft Windows NTPRIORITY=MS$NETBEUI MS$OTCETH$NIC Microsoft Workgroup Connection for DOS\DOS\NET Start BINDINGS=MS$OTCETH$NIC LANABASE=0 Ndis GenericPath Novell Netware for DOSNetware Netx \NETWARE\OS2\OTCETH.SYS Novell Netware for OS/2Novell Unixware Dlpi Driver Accompanying the PC Card for more details SCO Unix LLI Driver Init Single User Mode Section Four AppendicesMedia media type Appendix a ODI KeywordsFrame frame type Node Address nnnnnnnnnnnn INT interrupt levelMEM memory location Port I/O portFrame ETHERNET802.3 Media 10BASET Exclusive Dislink INT Protocol named protocol protocol id frame typeSocket socket number Look Ahead Size look ahead valueMEM= memory location Appendix B Ndis KeywordsMEDIA= media type SOCKET= socket number INTERRUPT= interrupt levelIOBASE= I/O port NETADDRESS= ‘nnnnnnnnnnnn’DRIVERNAME=STACK$ BINDINGS=OSITECHNIF PROTOCOL.INI ExampleFailed to register with Multi-Function Manager Appendix C MessagesPcmcia adapter not found Failed to register with Card ServicesUnable to configure Trumpcard Only supported on Pcmcia 2.x or higher Socket/Card ServicesNo Media Cable Connected Expected Tuple not foundMust be an AT .286 or higher system Hardware not respondingODI Specific Error Messages Section Four