Operation
Loading the OS/2 ODI Driver
The OS/2 ODI driver OTCETH.SYS for the Trumpcard is an OS/2 device driver, it must always be loaded after the LSL (Link Support Layer) module and before the IPX (IPX Protocol Stack).
Below is an example of a possible CONFIG.SYS file which allows the loading of necessary modules to establish a link from an OS/2 Workstation to a Netware Server:
| REM |
| DEVICE=C:\NETWARE\LSL.SYS |
| RUN=C:\NETWARE\DDAEMON.EXE |
| DEVICE=C:\NETWARE\OTCETH.SYS |
| DEVICE=C:\NETWARE\IPX.SYS |
| rem DEVICE=C:\NETWARE\SPX.SYS |
| rem RUN=C:\NETWARE\SPDAEMON.EXE |
| rem DEVICE=C:\NETWARE\NMPIPE.SYS |
| rem DEVICE=C:\NETWARE\NPSERVER.SYS |
| rem RUN=C:\NETWARE\NPDAEMON.EXE NP_COMPUTERNAME |
| DEVICE=C:\NETWARE\NWREQ.SYS |
| IFS=C:\NETWARE\NWIFS.IFS |
| RUN=C:\NETWARE\NWDAEMON.EXE |
| rem DEVICE=C:\NETWARE\NETBIOS.SYS |
| rem RUN=C:\NETWARE\NBDAEMON.EXE |
| rem DEVICE=C:\NETWARE\VIPX.SYS |
| rem DEVICE=C:\NETWARE\VSHELL.SYS |
| REM |
Note: | If your Ethernet frame type is NOT 802.2, you must use the NET.CFG |
| file to supply the appropriate frame type. The OTCETH driver will |
| default to 802.2 in accordance with Novell's specifications. |
Note: | Keyword specifications associated with the ODI driver are explained in |
| Appendix A, Error Messages in Appendix C. |
Novell Unixware DLPI Driver
The Trumpcard DLPI Driver is an AT&T Data Link Provider Interface (DLPI) compliant loadable STREAMS driver, for UNIX System V Release
4.2.The driver has a built in enabler for Intel, Databook and compatible PCMCIA equipped computers. With this driver installed networking functions will be available under Unixware.
User’s Guide and Reference | 3 - 19 |