Operation
For an OS/2 workstation you must first install LAN Adapter and Protocol Support (LAPS) and then import the Trumpcard driver.
1.Follow the instructions for installing LAPS in
accordance with your IBM LAN Adapter and Protocol Support Configuration Guide. You must first install LAPS on the workstation in order to install additional Network adapter drivers.
2.Issue the LAPS command from the IBMCOM subdirectory of the drive that contains the copy of LAPS.
3.Select ‘INSTALL’ from the LAPS logo window.
4.When prompted for the source path of additional Network drivers enter, A:\OS2. Insert the Trumpcard driver diskette into Drive A.
5.Select ‘Configure’, then select ‘Configure LAN Transports’, and then select ‘Continue’.
6.Remove any existing adapters and protocols from the Current Configuration menu that are not required.
7.Select ‘Ositech Trumpcard’ adapter from the Network Adapters menu and then select ‘Add’.
8.Add the required protocols from the Protocol menu, and finally select ‘OK’ when complete.
After installation of the Trumpcard NDIS device driver and protocols, you must install the needed requester (DOS or OS/2) to complete the installation.
The following are examples of changes made to the CONFIG.SYS and PROTOCOL.INI files on an OS/2 workstation installation.
CONFIG.SYS
DEVICE=C:\IBMCOM\LANMSGDD.OS2 /I:C:\IBMCOM DEVICE=C:\IBMCOM\PROTMAN.OS2 /I:C:\IBMCOM
RUN=C:\IBMCOM\PROTOCOL\NETBIND.EXE
RUN=C:\IBMCOM\LANMSGEX.EXE
DEVICE=C:\IBMCOM\PROTOCOL\NETBEUI.OS2
DEVICE=C:\IBMCOM\PROTOCOL\NETBIOS.OS2
DEVICE=C:\IBMCOM\PROTOCOL\LANDD.OS2
DEVICE=C:\IBMCOM\PROTOCOL\LANDLLDD.OS2
DEVICE=C:\IBMCOM\MACS\OTCETH.OS2
RUN=C:\IBMCOM\PROTOCOL\LANDLL.EXE
User’s Guide and Reference | 3 - 7 |